Solar panels are the main component of a solar electric system. Along with an inverter, mounting system, batteries and Solar Charge Controllers, solar panels can produce electricity to power the energy efficient appliances and lights and appliances in most households. Solar panels themselves generally last over 25 years, and require little maintenance.
Solar Panel – FuturaSun FU 130W
General Features
- Positive sorting of power classes 0-5 Wp
- 3 bus-bar high-efficiency cells decrease ohmic losses and increase the yield
- Tempered safety 3.2 mm glass to optimize the balance between mechanical stability and transparency
- High stability against wind (2400 Pascal) and snow (5400 Pascal)
- Maximum resistance against hail (83 km/h)
- Vertical packaging to avoid micro-cracks
CERTIFICATIONS
- IEC 61215, IEC 61730
- Fire Resistance – Class 1
- IEC61701, Salt Corrosion Resistance
- IEC62716, Ammonia Corrosion
- PID Test – Class A, Potential Induced Degradation
Performance Guarantee Max power decrease 0.7%/year
97% at the end of first year
90% at the end of 12th year
82% at the end of 25th year
Category: All in Trade limited - Solar Panels description
| Technical Data | |
| Module power (Pmax) | 130W |
| Module Efficiency | 15.29% |
| Max Power Voltage (Vmpp) | 17.5V |
| Max Power Current (Impp) | 7.43A |
| Open Circuit Voltage (Voc) | 21.5V |
| Short Circuit Current (Isc) | 8.06A |
| Max System Voltage | 1000V |
| Operating Temp | -40 to +85°C |
| Dimensions | 1200 x 672x 35 mm |
| Weight | 17,7 kg |
| Frame | Anodized aluminium frame with mounting and drainage holes |
| Junction box | Dimensions: 130 x 150 x 26 mm, IP 65 approved |
| Cables | Solar cable, length 900 mm assembled with MC4-combinable plugs |
Solar Panel- FuturaSun Fu 260W
General Features
- Positive sorting of power classes 0-5 Wp
- 3 bus-bar high-efficiency cells decrease ohmic losses and increase the yield
- Tempered safety 3.2 mm glass to optimize the balance between mechanical stability and transparency
- High stability against wind (2400 Pascal) and snow (5400 Pascal)
- Maximum resistance against hail (83 km/h)
- Vertical packaging to avoid micro-cracks
CERTIFICATIONS
- IEC 61215, IEC 61730
- Fire Resistance – Class 1
- IEC61701, Salt Corrosion Resistance
- IEC62716, Ammonia Corrosion
- PID Test – Class A, Potential Induced Degradation
97% at the end of first year
90% at the end of 12th year
82% at the end of 25th year Category: All in Trade limited - Solar Panels description
| Technical Data | |
| Module power (Pmax) | 260W |
| Module Efficiency | 15.3% |
| Max Power Voltage (Vmpp) | 30.3V |
| Max Power Current (Impp) | 8.26A |
| Open Circuit Voltage (Voc) | 37.55V |
| Short Circuit Current (Isc) | 8.83A |
| Max Reverse Current (Ir) | 15A |
| Max System Voltage | 1000V |
| Operating Temp | -40 to +85°C |
| Dimensions | 1650 x 990 x 35 mm |
| Weight | 17,7 kg |
| Frame | Anodized aluminium frame with mounting and drainage holes |
| Junction box | Dimensions: 130 x 150 x 26 mm, IP 65 approved |
| Cables | Solar cable, length 900 mm assembled with MC4-combinable plugs |
Solar Panel- Quartech CS6P-P Canadian Solar 250W
PRODUCT | KEY BENEFITS
Higher Energy Yield
- Outstanding performance at low irradiance
- Maximum energy yield at low NOCT
- Improved energy production through reduced cell series resistance
Increased System Reliability
- Enhanced system performance stability with PID resistant technology
- Long term system reliability with IP67 Junction Box
- Enhanced system reliability in extreme temperature environment with special cell level stress release technology
Extra Value to Customers
- Positive power tolerance up to 5W
- Stronger 40mm robust frame to hold 5400 Pa load
- Anti-glare project evaluation
- Salt Mist, Ammonia and Blowing Sand Resistance Apply to Seaside, Farm and Desert Environment
- 25 Year Linear Performance Warranty
- 25 year Performance Warranty Insurance
TEMPERATURE CHARACTERISTICS
| Specification | Data |
| Temperature Coefficient (Pmax) | -0.43% /℃ |
| Temperature Coefficient (Voc) | -0.34 %/ ℃ |
| Temperature Coefficient cient (Isc) | 0.065 %/ ℃ |
| Normal Operating Cell Temperature | 45+/-2 ℃ |
PERFORMANCE AT LOW IRRADIANCE
Industry leading performance at low irradiation environment, +96.5% 2 2 module efficiency from an irradiance of 1000w/m to 200w/m (AM 1.5, 25 ℃)
Category: All in Trade limited - Solar Panels description
Quartech CS6P-P Canadian Solar 250w
Canadian Solar’s new Quartech modules have raised the module efficiency to a new standard in the solar industry, making 3 busbar cell a yesterday’s technology. With the latest 4 busbar cell technology, Quartech modules demonstrated significant superiority over current 3 busbar cell modules in the area of power output and solar system reliability.
4 BUSBAR CELL MODULE | A BETTER MODULE
Quartech 4 busbar cell technology surpasses 3 busbar cell technology in the following aspects:
- Reduces cell series resistance
- Reduces stress between cell interconnectors
- Improves module conversion efficiency
- Improves product reliability
A solar charge controller will protect your batteries from being overcharged by your solar panels and it will block any reverse current (from the batteries) as well. Solar charge controllers will actually protect every aspect of your solar power system from your batteries to your solar panels. Temperature sensors are an inexpensive addition that helps the charge controller more accurately regulate the charge of the battery bank. Charge controllers come in various types. Solar charge controllers regulate the charge from a solar panel array to a battery bank. Solar lighting controllers allow you to control DC lights while simultaneously charging a battery bank from solar panels.
Solar Panel – FuturaSun FU 260W
Benefits
- Estimated 15 year life
- PWM series battery charging (not shunt)
- 3-position battery select: gel, sealed or flooded
- Very accurate control and measurement
- Jumper to eliminate telecom noise
- Parallel for up to 300 amps
- Temperature compensation
- 100% solid state
- Capable of 25% overloads
- LED’s indicate battery status and faults
PS-15
Morningstar’s ProStar is the world’s leading mid-range solar controller for both professional and consumer applications. This second generation ProStar:
- Adds new features and protections using highly advanced technology
- Provides longer battery life and improved system performance
- Sets new standards for reliability and self-diagnostics
| Technical Data | |
| Rated solar, load or diversion current | 15A |
| System Voltage | 12/24VDC |
| Minimum voltage to operate | 8V |
| Charge Algorithm | PWM, constant voltage |
| Self-consumption | 1 mA |
| Dimensions | H:10.5cm,W: 152.6cm, D: 2.2cm |
| Weight | 12 oz (0.34 kg) |
| Largest Wire | 6 AWG (16 mm2) |
| Operating ambient temperature | –40°C to +60°C |
Solar Technology – Morning Star -ProStar 30A PWM
Benefits
- Estimated 15 year life
- PWM series battery charging (not shunt)
- 3-position battery select: gel, sealed or flooded
- Very accurate control and measurement
- Jumper to eliminate telecom noise
- Parallel for up to 300 amps
- Temperature compensation
- 100% solid state
- Capable of 25% overloads
- LED’s indicate battery status and faults
PS-30
Morningstar’s ProStar is the world’s leading mid-range solar controller for both professional and consumer applications. This second generation ProStar:
- Adds new features and protections using highly advanced technology
- Provides longer battery life and improved system performance
- Sets new standards for reliability and self-diagnostics
| Technical Data | |
| Rated solar, load or diversion current | 30A |
| System Voltage | 12/24VDC |
| Minimum voltage to operate | 8V |
| Charge Algorithm | PWM, constant voltage |
| Self-consumption | 1 mA |
| Dimensions | H:10.5cm,W: 152.6cm, D: 2.2cm |
| Weight | 12 oz (0.34 kg) |
| Largest Wire | 6 AWG (16 mm2) |
| Operating ambient temperature | –40°C to +60°C |
Solar Technology – Morning Star -Tristar 30A MPPT
Benefits
- The industry’s highest peak efficiency of 99%
- Full Power Output in Ambient Temperatures up to 104°F (40°C)
- Max solar Open Circuit Voltage up to 150 VDC
- Extensive Networking and Communications Capabilities
- Built-in 200 days of Data Logging
- Standard 5 Year Warranty
| TS -30A MPPT | |
| Normal Battery Voltages | 12, 24, 36 or 48 volts DC |
| Max. Solar Open Circuit Voltage | 150 volts DC |
| Maximum Output Current | 30 amps @ 104°F(40℃) with adjustable current unit |
| Warranty | Standard 5 year |
| Weight | Unit: 4.2 kg / 9.2 lbs. |
| Dimensions (H x W x D) | Unit: 29.1 x 13.0 x 14.2 cm 11.4 x 5.1 x 5.6 inch |
TS-30-MPPT
Morningstar’s TriStar MPPT solar controller with TrakStar Technology™ is an advanced maximum power point tracking (MPPT) battery charger for off-grid photovoltaic (PV) systems up to 3kW. The controller provides the industry’s highest peak efficiency of 99% and significantly less power loss compared to other MPPT controllers.
The TriStar MPPT features a smart tracking algorithm that maximizes the energy harvest from the PV by rapidly finding the solar array peak power point with extremely fast sweeping of the entire I-V curve. This product is the first PV controller to include on-board Ethernet for a fully web-enabled interface and includes up to 200 days of data logging.
Solar Technology – Morning Star -Tristar 45A MPPT
Benefits
- The industry’s highest peak efficiency of 99%
- Full Power Output in Ambient Temperatures up to 104°F (40°C)
- Max solar Open Circuit Voltage up to 150 VDC
- Extensive Networking and Communications Capabilities
- Built-in 200 days of Data Logging
- Standard 5 Year Warranty
| TS -30A MPPT | |
| Normal Battery Voltages | 12, 24, 36 or 48 volts DC |
| Max. Solar Open Circuit Voltage | 150 volts DC |
| Maximum Output Current | 30 amps @ 104°F(40℃) with adjustable current unit |
| Warranty | Standard 5 year |
| Weight | Unit: 4.2 kg / 9.2 lbs. |
| Dimensions (H x W x D) | Unit: 29.1 x 13.0 x 14.2 cm 11.4 x 5.1 x 5.6 inch |
TS-45-MPPT
Morningstar’s TriStar MPPT solar controller with TrakStar Technology™ is an advanced maximum power point tracking (MPPT) battery charger for off-grid photovoltaic (PV) systems up to 3kW. The controller provides the industry’s highest peak efficiency of 99% and significantly less power loss compared to other MPPT controllers.
The TriStar MPPT features a smart tracking algorithm that maximizes the energy harvest from the PV by rapidly finding the solar array peak power point with extremely fast sweeping of the entire I-V curve. This product is the first PV controller to include on-board Ethernet for a fully web-enabled interface and includes up to 200 days of data logging.
Solar Technology – Morning Star -Tristar 45A PWM
Benefits
- Ratings to 45A at 48VDC will handle solar arrays up to 3.2kW
- Full Power Output operating at full ratings to 60°C. No need to de-rate.
- Max solar Open Circuit Voltage up to 125 VDC
- connects to a personal computer for custom settings, data logging and remote monitoring and control
- Fully protected against reverse polarity, short circuit, over current, high temperature and over voltage
- Standard 2 Year Warranty
Certifications
- CE Compliant
- ETL Listed (UL 1741)
- cETL (CSA-C22.2 No.107.1-95)
- TUV (IEC 62109-1)
- Complies with U.S. National Electric Code
- Manufactured in a certified ISO 9001 facility
- MET Labs (EN 60335-1, EN 60335-2-29)
TS-45-PWM
Morningstar’s TriStar Controller is a three-function controller that provides reliable solar battery charging, load control or diversion regulation. The controller operates in one of these modes at a time and two or more controllers may be used to provide multiple functions. The TriStar uses advanced technology and automated production to provide exciting new features at a competitive cost. The optional TriStar meter is the most sophisticated and informative controller meter on the market. The controller is UL listed and is designed for both solar home systems and professional applications.
| Technical Data | |
| Rated solar, load or diversion current | 45A |
| System Voltage | 12-48V |
| Minimum voltage to operate | 9V |
| Maximum solar voltage (Voc) | 125V |
| Self-consumption | <20mA |
| Dimensions | H:26.0cm,W: 2.7cm, D: 7.1cm |
| Weight | 1.6 kg/3.5 lb |
| Largest Wire | 35mm2/2 AWG |
| Operating ambient temperature | –40°C to +60°C |
Solar Technology – Morning Star -Tristar 60A MPPT
Benefits
- The industry’s highest peak efficiency of 99%
- Full Power Output in Ambient Temperatures up to 104°F (40°C)
- Max solar Open Circuit Voltage up to 150 VDC
- Extensive Networking and Communications Capabilities
- Built-in 200 days of Data Logging
- Standard 5 Year Warranty
| TS -60A MPPT | |
| Normal Battery Voltages | 12, 24, 36 or 48 volts DC |
| Max. Solar Open Circuit Voltage | 150 volts DC |
| Maximum Output Current | 60 amps @ 104°F(40℃) with adjustable current unit |
| Warranty | Standard 5 year |
| Weight | Unit: 4.2 kg / 9.2 lbs. |
| Dimensions (H x W x D) | Unit: 29.1 x 13.0 x 14.2 cm 11.4 x 5.1 x 5.6 inch |
TS-60-MPPT
Morningstar’s TriStar MPPT solar controller with TrakStar Technology™ is an advanced maximum power point tracking (MPPT) battery charger for off-grid photovoltaic (PV) systems up to 3kW. The controller provides the industry’s highest peak efficiency of 99% and significantly less power loss compared to other MPPT controllers.
The TriStar MPPT features a smart tracking algorithm that maximizes the energy harvest from the PV by rapidly finding the solar array peak power point with extremely fast sweeping of the entire I-V curve. This product is the first PV controller to include on-board Ethernet for a fully web-enabled interface and includes up to 200 days of data logging.
Solar Technology – Morning Star -Tristar 60A PWM
Benefits
- Ratings to 45A at 48VDC will handle solar arrays up to 3.2kW
- Full Power Output operating at full ratings to 60°C. No need to de-rate.
- Max solar Open Circuit Voltage up to 125 VDC
- connects to a personal computer for custom settings, data logging and remote monitoring and control
- Fully protected against reverse polarity, short circuit, over current, high temperature and over voltage
- Standard 2 Year Warranty
Certifications
- CE Compliant
- ETL Listed (UL 1741)
- cETL (CSA-C22.2 No.107.1-95)
- TUV (IEC 62109-1)
- Complies with U.S. National Electric Code
- Manufactured in a certified ISO 9001 facility
- MET Labs (EN 60335-1, EN 60335-2-29)
TS-60-PWM
Morningstar’s TriStar Controller is a three-function controller that provides reliable solar battery charging, load control or diversion regulation. The controller operates in one of these modes at a time and two or more controllers may be used to provide multiple functions. The TriStar uses advanced technology and automated production to provide exciting new features at a competitive cost. The optional TriStar meter is the most sophisticated and informative controller meter on the market. The controller is UL listed and is designed for both solar home systems and professional applications.
| Technical Data | |
| Rated solar, load or diversion current | 60A |
| System Voltage | 12-48V |
| Minimum voltage to operate | 9V |
| Maximum solar voltage (Voc) | 125V |
| Self-consumption | <20mA |
| Dimensions | H:26.0cm,W: 2.7cm, D: 7.1cm |
| Weight | 1.6 kg/3.5 lb |
| Largest Wire | 35mm2/2 AWG |
| Operating ambient temperature | –40°C to +60°C |
Solar Technology – Outback flexmax 60
Benefits
- Increases PV Array Output by up to 30%
- Advanced Continuous Maximum Power Point Tracking
- Full Power Output in Ambient Temperatures up to 104°F (40°C)
- Battery Voltages from 12 VDC to 60 VDC
- Fully OutBack Network Integrated and Programmable
- Programmable Auxiliary Control Output
- Built-in 128 days of Data Logging
- Standard 4 Year Warranty
| Flex max – 80 – FM80-150VDC | Flex max – 60 – FM60-150VDC | |
| Normal Battery Voltages | 12, 24, 36, 48, or 60 VDC (Single model – selectable via field programming at start-up) | 12, 24, 36, 48, or 60 VDC (Single model – selectable via field programming at start-up) |
| Maximum Output Current | 80 amps @ 104°F (40°C) with adjustable current limit | 60 amps @ 104°F (40°C) with adjustable current limit |
| Maximum Solar Array STC Nameplate | 12 VDC systems 1250 Watts / 24 VDC systems 2500 Watts / 48 VDC systems 5000 Watts / 60 VDC Systems 6250 Watts | 12 VDC systems 900 Watts / 24 VDC systems 1800 Watts / 48 VDC systems 3600 Watts / 60 VDC Systems 4500 Watts |
| Maximum PV Open Circuit Voltage | 150 VOC (25°C), 145 VOC (40°C) | 150 VOC (25°C), 145 VOC (40°C) |
| Standby Power Consumption | Less than 1 Watt typical | Less than 1 Watt typical |
| Operating Efficiency | 97.5% @ 80 Amps in a 48 VDC System - Typical | 97.5% @ 60 Amps in a 48 VDC System - Typical |
| Warranty | Standard 5 year / Available 10 year | Standard 5 year / Available 10 year |
| Weight | Unit: 12.20 lbs (5.56kgs) Shipping: 5.50 lbs (7.03kgs) | Unit: 11.65 lbs (5.3kgs) Shipping: 14.90 lbs (6.76kgs) |
| Dimensions (H x W x D) | Unit: 16.25” x 5.75” x 4.5” (41.3 x 14 x 10 cm) Shipping: 21” x 10.5” x 10.5” (53 x 27 x 27 cm) | Unit: 16.25” x 5.75” x 4.5” (41.3 x 14 x 10 cm) Shipping: 21” x 10.5” x 10.5” (53 x 27 x 27 cm) |
Outback flexmax 60
The FLEXmax family of charge controllers is the latest innovation in Maximum Power Point Tracking (MPPT) charge controllers from OutBack Power. The innovative FLEXmax MPPT software algorithm is both continuous and active, increasing your photovoltaic array power yield up to 30% compared to non-MPPT controllers. Thanks to active cooling and intelligent thermal management cooling, both FLEXmax charge controllers can operate at their full maximum current rating, 60 Amps , in ambient temperatures as high as 104°F (40°C). Included in all of the FLEXmax Charge Controllers are the revolutionary features first developed by OutBack Power, including support for a wide range of nominal battery Voltages and the ability to step-down a higher voltage solar array to recharge a lower voltage battery bank. A built-in, backlit 80 character display shows the current status and logged system performance data for the last 128 days at the touch of a button. The integrated OutBack Power network communications allows FLEXmax series Charge Controllers to be remotely programmed and monitored via a MATE system display and provides unrivaled complete system integration. FLEXmax MPPT Charge Controllers are the only choice when you demand a high performance, efficient and versatile charge controller for your advanced power system.
Solar Technology – Outback flexmax 80
Benefits
- Increases PV Array Output by up to 30%
- Advanced Continuous Maximum Power Point Tracking
- Full Power Output in Ambient Temperatures up to 104°F (40°C)
- Battery Voltages from 12 VDC to 60 VDC
- Fully OutBack Network Integrated and Programmable
- Programmable Auxiliary Control Output
- Built-in 128 days of Data Logging
- Standard 4 Year Warranty
| Flex max – 80 – FM80-150VDC | Flex max – 60 – FM60-150VDC | |
| Normal Battery Voltages | 12, 24, 36, 48, or 60 VDC (Single model – selectable via field programming at start-up) | 12, 24, 36, 48, or 60 VDC (Single model – selectable via field programming at start-up) |
| Maximum Output Current | 80 amps @ 104°F (40°C) with adjustable current limit | 60 amps @ 104°F (40°C) with adjustable current limit |
| Maximum Solar Array STC Nameplate | 12 VDC systems 1250 Watts / 24 VDC systems 2500 Watts / 48 VDC systems 5000 Watts / 60 VDC Systems 6250 Watts | 12 VDC systems 900 Watts / 24 VDC systems 1800 Watts / 48 VDC systems 3600 Watts / 60 VDC Systems 4500 Watts |
| Maximum PV Open Circuit Voltage | 150 VOC (25°C), 145 VOC (40°C) | 150 VOC (25°C), 145 VOC (40°C) |
| Standby Power Consumption | Less than 1 Watt typical | Less than 1 Watt typical |
| Operating Efficiency | 97.5% @ 80 Amps in a 48 VDC System - Typical | 97.5% @ 60 Amps in a 48 VDC System - Typical |
| Warranty | Standard 5 year / Available 10 year | Standard 5 year / Available 10 year |
| Weight | Unit: 12.20 lbs (5.56kgs) Shipping: 5.50 lbs (7.03kgs) | Unit: 11.65 lbs (5.3kgs) Shipping: 14.90 lbs (6.76kgs) |
| Dimensions (H x W x D) | Unit: 16.25” x 5.75” x 4.5” (41.3 x 14 x 10 cm) Shipping: 21” x 10.5” x 10.5” (53 x 27 x 27 cm) | Unit: 16.25” x 5.75” x 4.5” (41.3 x 14 x 10 cm) Shipping: 21” x 10.5” x 10.5” (53 x 27 x 27 cm) |
Outback flexmax 60 The FLEXmax family of charge controllers is the latest innovation in Maximum Power Point Tracking (MPPT) charge controllers from OutBack Power. The innovative FLEXmax MPPT software algorithm is both continuous and active, increasing your photovoltaic array power yield up to 30% compared to non-MPPT controllers. Thanks to active cooling and intelligent thermal management cooling, both FLEXmax charge controllers can operate at their full maximum current rating, 60 Amps , in ambient temperatures as high as 104°F (40°C). Included in all of the FLEXmax Charge Controllers are the revolutionary features first developed by OutBack Power, including support for a wide range of nominal battery Voltages and the ability to step-down a higher voltage solar array to recharge a lower voltage battery bank. A built-in, backlit 80 character display shows the current status and logged system performance data for the last 128 days at the touch of a button. The integrated OutBack Power network communications allows FLEXmax series Charge Controllers to be remotely programmed and monitored via a MATE system display and provides unrivaled complete system integration. FLEXmax MPPT Charge Controllers are the only choice when you demand a high performance, efficient and versatile charge controller for your advanced power system.
Solar water pumps are used for pumping water for livestock, crop irrigation and even simple domestic water supply where a home/town is remote and off the water pipeline. Submersible Solar/DC Pumps: Lift up to 650 feet and fit in a 4″ or larger well casing. Submersible solar pumps are used when the water supply is more than 20 feet from the surface. They can operate directly off solar panels, batteries or in some cases an AC power source. Surface Solar/DC Pumps: Good for applications with shallow wells, ponds, streams or storage tanks. Best if water supply is 20 feet or less from the surface. Used primarily for solar water heating applications. These solar pumps run directly from a small solar panel. No battery required.
Lorentz PS600CS-17-1 Surface Swimming Pool Pump
PS600 CS-17-1 Surface
Features
- Engineered in Germany
- EC DRIVEDC brushless motors, designed for solar with over 90% efficiency
- High quality non corrodible materials used throughout
- Solar direct connect with AC connection options
- MPPT technology to maximise power use from PV modules
- Optional data logger
LORENTZ PS Swimming Pool Pumps are high quality products designed for use in residential and commercial swimming pools and spas. In most pool applications all of the filtration needs can be met directly from solar panels meaning no electricity costs and significant benefits to the environment. The LORENTZ pump uses a DC brushless motor for high efficiency and reliability, it is connected to a solar generator via a controller. The controller monitors the system, controls the pump speed and optimizes the amount of water pumped based on the power available.
Benefits
- Zero energy costs provide a very fast return on investment
- Longer life expectancy than standard AC motors
- Quiet and efficient
- Proven in service record
- Speed controllable to match the pool size exactly
- Smart modular design for simple and cost effective servicing and repair
- Fast and simple installation, direct replacement for an existing pool pump
| Technical Data | |
| Max. total dynamic head (TDH) [m] | 12 |
| Max. flow rate [m3/h] | 19 |
| Max. power voltage (Vmp)* [V DC] | >68 |
| Open circuit voltage (Voc) [V DC] | max. 150 |
| Nominal voltage [V DC] | 48 – 72 |
| Nominal voltage [V DC] | 48 |
Solar Swimming pool Pump – Lorentz PS1800CS-37-1 Surface
PS600 CS-17-1 Surface
Features
- Engineered in Germany
- EC DRIVEDC brushless motors, designed for solar with over 90% efficiency
- High quality non corrodible materials used throughout
- Solar direct connect with AC connection options
- MPPT technology to maximise power use from PV modules
- Optional data logger
LORENTZ PS Swimming Pool Pumps are high quality products designed for use in residential and commercial swimming pools and spas. In most pool applications all of the filtration needs can be met directly from solar panels meaning no electricity costs and significant benefits to the environment. The LORENTZ pump uses a DC brushless motor for high efficiency and reliability, it is connected to a solar generator via a controller. The controller monitors the system, controls the pump speed and optimizes the amount of water pumped based on the power available.
Benefits
- Zero energy costs provide a very fast return on investment
- Longer life expectancy than standard AC motors Quiet and efficient
- Proven in service record Speed controllable to match the pool size exactly
- Smart modular design for simple and cost effective servicing and repair
- Fast and simple installation, direct replacement for an existing pool pump
| Technical Data | |
| Max. total dynamic head (TDH) [m] | 14 |
| Max. flow rate [m3/h] | 36 |
| Max. power voltage (Vmp)* [V DC] | >102 |
| Open circuit voltage (Voc) [V DC] | max. 200 |
| Nominal voltage [V DC] | 84 – 96 |
| Nominal voltage [V DC] | 96 |
Solar Water Pump – Lorentz PS150-Boost Surface
PS150 Boost
Features
- Engineered in Germany
- EC DRIVEDC brushless motors, designed for solar with over 90% efficiency
- High quality non corrodible materials used throughout
- Solar direct connect with AC connection options
- MPPT technology to maximise power use from PV modules
- Optional data logger
ORENTZ PS Surface Pumps are high quality products designed for water transfer, pond management and irrigation applications where a surface pump is required. The LORENTZ PS range of DC powered surface pumps are connected to a solar generator via a controller. The controller provides inputs for monitoring storage tank levels, controlling the pump speed and uses maximum power point tracking technology to optimize the water volume that is pumped.
Benefits
- Long life expectancy and proven in service record
- Designed for use in remote and harsh conditions
- Smart modular design for simple and cost effective servicing and repair
- Fast and simple installation
- Cost effective spare parts philosophy
- Very strong ROI against diesel powered pumping reducing production costs and reducing carbon footprint
Technical Data
| Max. total dynamic head (TDH) [m] | 150 |
| Max. flow rate [m3/h] | 1.3 |
| Max. power voltage (Vmp)* [V DC] | >17 |
| Open circuit voltage (Voc) [V DC] | max. 50 |
| Nominal voltage [V DC] | 12 – 24 |
| Nominal voltage [V DC] | 12 & 24 |
Solar Water Pump – Lorentz PS150C Submersible
PS150 Boost
Features
- Engineered in Germany
- EC DRIVEDC brushless motors, designed for solar with over 90% efficiency
- Cast stainless steel components
- High quality non corrodible materials used throughout
- Solar direct connect with AC connection options
- MPPT technology to maximise power use from PV modules
- Optional data logger
LORENTZ PS Surface Pumps are high quality products designed for water transfer, pond management and irrigation applications where a surface pump is required. The LORENTZ PS range of DC powered surface pumps are connected to a solar generator via a controller. The controller provides inputs for monitoring storage tank levels, controlling the pump speed and uses maximum power point tracking technology to optimize the water volume that is pumped.
Benefits
- Long life expectancy and proven in service record
- Designed for use in remote and harsh conditions
- Smart modular design for simple and cost effective servicing and repair
- Water filled motors for reliability and to avoid oil contamination
- Fast and simple installation
- Cost effective spare parts philosophy
- Very strong ROI against diesel powered pumping reducing production costs and reducing carbon footprint
- Large range of pumps to closely match each application and optimise efficiency
Technical Data
| Max. total dynamic head (TDH) [m] | 20 |
| Max. flow rate [m3/h] | 4.0 |
| Max. power voltage (Vmp)* [V DC] | > 17 |
| Open circuit voltage (Voc) [V DC] | max. 50 |
| Nominal voltage [V DC] | 12 – 24 |
| Nominal voltage [V DC] | 12 & 24 |
Solar Water Pump – Lorentz PS15k2 Submersible
PS150 Boost
Features
- Engineered in Germany using high quality non corrodible materials
- IP54 / NEMA 3A corrosion resistant housing
- 0 – 60Hz motor speed control
- Wide range of inputs to influence pump behaviour
- Integrated monitoring and management including onboard recording of 5 years performance data, smart device access via PumpScanner Android™ App and integration to LORENTZ pumpMANAGER remote management service
- Inbuilt irradiation measurement and pump control based on power available
- Integration with the LORENTZ SmartPSU for grid / generator connection and power blending
LORENTZ PSk2 systems are our next generation of solar water pumps designed to deliver the highest volume of water across a wide range of lifts. PSk2 pumps perform equally well in irrigation projects and for a wide area of drinking water applications where they reliably meet the most demanding requirements, economically and without the use of fossil fuels or a grid connection.PSk2 provides all of the features and functions that larger scale water projects require including a wide range of sensor inputs and inbuilt monitoring and management. PSk2 is also compatible with LORENTZ CONNECTED services for cost effective remote monitoring and management. Although technically advanced, PSk2 is simple to specify, install and maintain and provides exceptional performance driven by LORENTZ long experience of off grid solar pumping.
Benefits
- Very strong ROI against diesel powered pumping, reducing water production costs and reducing carbon footprint
- Advanced power management techniques to deliver the most water based on the power available
- Comprehensive inputs and outputs to provide a cost effective single unit solution
- Wide range of products to closely match each application and optimize efficiency
- Fast specification, installation and configuration allow for fast implementation and minimal downtime
- Smart modular product design for simple and cost effective product repair
- Powerful inbuilt monitoring and control features provide detailed operational information and simple access to advanced features
| Technical Data | |
| Max. flow rate [m3/h] | 235 |
| Max. total dynamic head (TDH) [m] | 140 |
| Open circuit voltage (Voc) [V DC] | 850 |
Solar Water Pump – Lorentz PS15k2 Surface
PS150 Boost
Features
- Engineered in Germany using high quality non corrodible materials
- IP54 / NEMA 3A corrosion resistant housing
- 0 – 60Hz motor speed control
- Wide range of inputs to influence pump behaviour
- Integrated monitoring and management including onboard recording of 5 years performance data, smart device access via PumpScanner Android™ App and integration to LORENTZ pumpMANAGER remote management service
- Inbuilt irradiation measurement and pump control based on power available
- Integration with the LORENTZ SmartPSU for grid / generator connection and power blending
LORENTZ PSk2 systems are our next generation of solar water pumps designed to deliver the highest volume of water across a wide range of lifts. PSk2 pumps perform equally well in irrigation projects and for a wide area of drinking water applications where they reliably meet the most demanding requirements, economically and without
LORENTZ PSk2 systems are our next generation of solar water pumps designed to deliver the highest volume of water across a wide range of lifts. PSk2 pumps perform equally well in irrigation projects and for a wide area of drinking water applications where they reliably meet the most demanding requirements, economically and without the use of fossil fuels or a grid connection.PSk2 provides all of the features and functions that larger scale water projects require including a wide range of sensor inputs and inbuilt monitoring and management. PSk2 is also compatible with LORENTZ CONNECTED services for cost effective remote monitoring and management. Although technically advanced, PSk2 is simple to specify, install and maintain and provides exceptional performance driven by LORENTZ long experience of off grid solar pumping.
Benefits
- Very strong ROI against diesel powered pumping, reducing water production costs and reducing carbon footprint
- Advanced power management techniques to deliver the most water based on the power available
- Comprehensive inputs and outputs to provide a cost effective single unit solution
- Wide range of products to closely match each application and optimize efficiency
- Fast specification, installation and configuration allow for fast implementation and minimal downtime
- Smart modular product design for simple and cost effective product repair
- Powerful inbuilt monitoring and control features provide detailed operational information and simple access to advanced features
Technical Data
| Max. total dynamic head (TDH) [m] | 80 |
| Max. flow rate [m3/h] | 279 |
| Open circuit voltage (Voc) [V DC] | max. 850 |
Solar Water Pump – Lorentz PS1800C Submersible
PS150 Boost
Features
- Engineered in Germany
- EC DRIVEDC brushless motors, designed for solar with over 90% efficiency
- Cast stainless steel components
- High quality non corrodible materials used throughout
- Solar direct connect with AC connection options
- MPPT technology to maximise power use from PV modules
- Optional data logger
LORENTZ PS Surface Pumps are high quality products designed for water transfer, pond management and irrigation applications where a surface pump is required. The LORENTZ PS range of DC powered surface pumps are connected to a solar generator via a controller. The controller provides inputs for monitoring storage tank levels, controlling the pump speed and uses maximum power point tracking technology to optimize the water volume that is pumped.
Benefits
- Long life expectancy and proven in service record
- Designed for use in remote and harsh conditions
- Smart modular design for simple and cost effective servicing and repair
- Water filled motors for reliability and to avoid oil contamination
- Fast and simple installation
- Cost effective spare parts philosophy
- Very strong ROI against diesel powered pumping reducing production costs and reducing carbon footprint
Technical Data
| Max. total dynamic head (TDH) [m] | 100 |
| Max. flow rate [m3/h] | 53 |
| Max. power voltage (Vmp)* [V DC] | > 102 |
| Open circuit voltage (Voc) [V DC] | max. 120 |
| Nominal voltage [V DC] | 72 – 96 |
| Nominal voltage [V DC] | 96 |
Solar Water Pump – Lorentz PS1800CS-F Surface
PS150 Boost
Features
- Engineered in Germany
- EC DRIVEDC brushless motors, designed for solar with over 90% efficiency
- Cast stainless steel components
- High quality non corrodible materials used throughout
- Solar direct connect with AC connection options
- MPPT technology to maximise power use from PV modules
- Optional data logger
LORENTZ PS Surface Pumps are high quality products designed for water transfer, pond management and irrigation applications where a surface pump is required. The LORENTZ PS range of DC powered surface pumps are connected to a solar generator via a controller. The controller provides inputs for monitoring storage tank levels, controlling the pump speed and uses maximum power point tracking technology to optimize the water volume that is pumped.
Benefits
- Long life expectancy and proven in service record
- Designed for use in remote and harsh conditions
- Smart modular design for simple and cost effective servicing and repair
- Fast and simple installation
- Cost effective spare parts philosophy
- Very strong ROI against diesel powered pumping reducing production costs and reducing carbon footprint
Technical Data
| Max. total dynamic head (TDH) [m] | 50 |
| Max. flow rate [m3/h] | 8.5 |
| Max. power voltage (Vmp)* [V DC] | >102 |
| Open circuit voltage (Voc) [V DC] | max. 200 |
| Nominal voltage [V DC] | 72 – 96 |
| Nominal voltage [V DC] | 96 |
Solar Water Pump – Lorentz PS1800HR Submersible
PS150 Boost
Features
- Engineered in Germany
- EC DRIVEDC brushless motors, designed for solar with over 90% efficiency
- Cast stainless steel components
- High quality non corrodible materials used throughout
- Solar direct connect with AC connection options
- MPPT technology to maximise power use from PV modules
- Optional data logger
LORENTZ PS helical rotor pumps are high quality products designed for drinking water supply, livestock watering and smaller irrigation applications. PS helical rotor pump systems deliver water economically, cleanly and reliably, anywhere.The LORENTZ PS range of DC powered helical rotor pumps have been designed specifically to pump water efficiently using solar power. The helical rotor pump is simple, efficient and reliable, pumping water with very low levels of solar power from up to 450 m below the ground.Each system consists of a pump, pump motor and a controller. This modular concept keeps all electronics above ground providing simple servicing, ease of access and a low cost of ownership.
Benefits
- Long life expectancy and proven in service record
- Designed for use in remote and harsh conditions
- Smart modular design for simple and cost effective servicing and repair
- Water filled motors for reliability and to avoid oil contamination
- Fast and simple installation
- Cost effective spare parts philosophy
- Very strong ROI against diesel powered pumping reducing production costs and reducing carbon footprint
- Large range of pumps to closely match each application and optimise efficiency
Technical Data
| Max. total dynamic head (TDH) [m] | 250 |
| Max. flow rate [m3/h] | 3.9 |
| Max. power voltage (Vmp)* [V DC] | >102 |
| Open circuit voltage (Voc) [V DC] | max. 200 |
| Nominal voltage [V DC] | 72 – 96 |
| Nominal voltage [V DC] | 96 |
Solar Water Pump – Lorentz PS200HR Submersible
PS150 Boost
Features
- Engineered in Germany
- EC DRIVEDC brushless motors, designed for solar with over 90% efficiency
- Cast stainless steel components
- High quality non corrodible materials used throughout
- Solar direct connect with AC connection options
- MPPT technology to maximise power use from PV modules
- Optional data logger
LORENTZ PS helical rotor pumps are high quality products designed for drinking water supply, livestock watering and smaller irrigation applications. PS helical rotor pump systems deliver water economically, cleanly and reliably, anywhere.The LORENTZ PS range of DC powered helical rotor pumps have been designed specifically to pump water efficiently using solar power. The helical rotor pump is simple, efficient and reliable, pumping water with very low levels of solar power from up to 450 m below the ground.Each system consists of a pump, pump motor and a controller. This modular concept keeps all electronics above ground providing simple servicing, ease of access and a low cost of ownership.
Benefits
- Long life expectancy and proven in service record
- Designed for use in remote and harsh conditions
- Smart modular design for simple and cost effective servicing and repair
- Water filled motors for reliability and to avoid oil contamination
- Fast and simple installation
- Cost effective spare parts philosophy
- Very strong ROI against diesel powered pumping reducing production costs and reducing carbon footprint
- Large range of pumps to closely match each application and optimise efficiency
Technical Data
| Max. total dynamic head (TDH) [m] | 50 |
| Max. flow rate [m3/h] | 2.6 |
| Max. power voltage (Vmp)* [V DC] | >34 |
| Open circuit voltage (Voc) [V DC] | max. 100 |
| Nominal voltage [V DC] | 24 – 48 |
| Nominal voltage [V DC] | 24 and 48 |
Solar Water Pump – Lorentz PS21k2 Submersible
PS150 Boost
Features
- Engineered in Germany using high quality non corrodible materials
- IP54 / NEMA 3A corrosion resistant housing
- 0 – 60Hz motor speed control
- Wide range of inputs to influence pump behaviour
- Integrated monitoring and management including onboard recording of 5 years performance data, smart device access via PumpScanner Android™ App and integration to LORENTZ pumpMANAGER remote management service
- Inbuilt irradiation measurement and pump control based on power available
- Integration with the LORENTZ SmartPSU for grid / generator connection and power blending
LORENTZ PSk2 systems are our next generation of solar water pumps designed to deliver the highest volume of water across a wide range of lifts. PSk2 pumps perform equally well in irrigation projects and for a wide area of drinking water applications where they reliably meet the most demanding requirements, economically and without the use of fossil fuels or a grid connection.PSk2 provides all of the features and functions that larger scale water projects require including a wide range of sensor inputs and inbuilt monitoring and management. PSk2 is also compatible with LORENTZ CONNECTED services for cost effective remote monitoring and management. Although technically advanced, PSk2 is simple to specify, install and maintain and provides exceptional performance driven by LORENTZ long experience of off grid solar pumping.
Benefits
- Very strong ROI against diesel powered pumping reducing production costs and reducing carbon footprint
- Advanced power management techniques to deliver the most water based on the power available
- Comprehensive inputs and outputs to provide a cost effective single unit solution
- Wide range of products to closely match each application and optimize efficiency
- Fast specification, installation and configuration allow for fast implementation and minimal downtime
- Smart modular product design for simple and cost effective product repair
- Powerful inbuilt monitoring and control features provide detailed operational information and simple access to advanced features
| Technical Data | |
| Max. total dynamic head (TDH) [m] | 120 |
| Max. flow rate [m3/h] | 218 |
| Open circuit voltage (Voc) [V DC] | max. 850 |
Solar Water Pump – Lorentz PS21k2 Surface
PS150 Boost
Features
- Engineered in Germany using high quality non corrodible materials
- IP54 / NEMA 3A corrosion resistant housing
- 0 – 60Hz motor speed control
- Wide range of inputs to influence pump behaviour
- Integrated monitoring and management including onboard recording of 5 years performance data, smart device access via PumpScanner Android™ App and integration to LORENTZ pumpMANAGER remote management service
- Inbuilt irradiation measurement and pump control based on power available
- Integration with the LORENTZ SmartPSU for grid / generator connection and power blending
LORENTZ PSk2 systems are our next generation of solar water pumps designed to deliver the highest volume of water across a wide range of lifts. PSk2 pumps perform equally well in irrigation projects and for a wide area of drinking water applications where they reliably meet the most demanding requirements, economically and without
LORENTZ PSk2 systems are our next generation of solar water pumps designed to deliver the highest volume of water across a wide range of lifts. PSk2 pumps perform equally well in irrigation projects and for a wide area of drinking water applications where they reliably meet the most demanding requirements, economically and without the use of fossil fuels or a grid connection.PSk2 provides all of the features and functions that larger scale water projects require including a wide range of sensor inputs and inbuilt monitoring and management. PSk2 is also compatible with LORENTZ CONNECTED services for cost effective remote monitoring and management. Although technically advanced, PSk2 is simple to specify, install and maintain and provides exceptional performance driven by LORENTZ long experience of off grid solar pumping.
Benefits
- Very strong ROI against diesel powered pumping, reducing water production costs and reducing carbon footprint
- Advanced power management techniques to deliver the most water based on the power available
- Comprehensive inputs and outputs to provide a cost effective single unit solution
- Wide range of products to closely match each application and optimize efficiency
- Fast specification, installation and configuration allow for fast implementation and minimal downtime
- Smart modular product design for simple and cost effective product repair
- Powerful inbuilt monitoring and control features provide detailed operational information and simple access to advanced features
Technical Data
| Max. total dynamic head (TDH) [m] | 80 |
| Max. flow rate [m3/h] | 279 |
| Open circuit voltage (Voc) [V DC] | max. 850 |
Solar Water Pump – Lorentz PS25k2 Submersible
PS150 Boost
Features
- Engineered in Germany using high quality non corrodible materials
- IP54 / NEMA 3A corrosion resistant housing
- 0 – 60Hz motor speed control
- Wide range of inputs to influence pump behaviour
- Integrated monitoring and management including onboard recording of 5 years performance data, smart device access via PumpScanner Android™ App and integration to LORENTZ pumpMANAGER remote management service
- Inbuilt irradiation measurement and pump control based on power available
- Integration with the LORENTZ SmartPSU for grid / generator connection and power blending
LORENTZ PSk2 systems are our next generation of solar water pumps designed to deliver the highest volume of water across a wide range of lifts. PSk2 pumps perform equally well in irrigation projects and for a wide area of drinking water applications where they reliably meet the most demanding requirements, economically and without the use of fossil fuels or a grid connection.PSk2 provides all of the features and functions that larger scale water projects require including a wide range of sensor inputs and inbuilt monitoring and management. PSk2 is also compatible with
LORENTZ CONNECTED services for cost effective remote monitoring and management. Although technically advanced, PSk2 is simple to specify, install and maintain and provides exceptional performance driven by LORENTZ long experience of off grid solar pumping.
Benefits
- Very strong ROI against diesel powered pumping, reducing water production costs and reducing carbon footprint
- Advanced power management techniques to deliver the most water based on the power available
- Comprehensive inputs and outputs to provide a cost effective single unit solution
- Wide range of products to closely match each application and optimize efficiency
- Fast specification, installation and configuration allow for fast implementation and minimal downtime
- Smart modular product design for simple and cost effective product repair
- Powerful inbuilt monitoring and control features provide detailed operational information and simple access to advanced features
Technical Data
| Max. total dynamic head (TDH) [m] | 200 |
| Max. flow rate [m3/h] | 228 |
| Open circuit voltage (Voc) [V DC] | max. 850 |
Solar Water Pump – Lorentz PS25k2 Surface
PS150 Boost
Features
- Engineered in Germany using high quality non corrodible materials
- IP54 / NEMA 3A corrosion resistant housing
- 0 – 60Hz motor speed control
- Wide range of inputs to influence pump behaviour
- Integrated monitoring and management including onboard recording of 5 years performance data, smart device access via PumpScanner Android™ App and integration to LORENTZ pumpMANAGER remote management service
- Inbuilt irradiation measurement and pump control based on power available
- Integration with the LORENTZ SmartPSU for grid / generator connection and power blending
LORENTZ PSk2 systems are our next generation of solar water pumps designed to deliver the highest volume of water across a wide range of lifts. PSk2 pumps perform equally well in irrigation projects and for a wide area of drinking water applications where they reliably meet the most demanding requirements, economically and without the use of fossil fuels or a grid connection.PSk2 provides all of the features and functions that larger scale water projects require including a wide range of sensor inputs and inbuilt monitoring and management. PSk2 is also compatible with LORENTZ CONNECTED services for cost effective remote monitoring and management. Although technically advanced, PSk2 is simple to specify, install and maintain and provides exceptional performance driven by LORENTZ long experience of off grid solar pumping.
Benefits
- Very strong ROI against diesel powered pumping, reducing water production costs and reducing carbon footprint
- Advanced power management techniques to deliver the most water based on the power available
- Comprehensive inputs and outputs to provide a cost effective single unit solution
- Wide range of products to closely match each application and optimize efficiency
- Fast specification, installation and configuration allow for fast implementation and minimal downtime
- Smart modular product design for simple and cost effective product repair
- Powerful inbuilt monitoring and control features provide detailed operational information and simple access to advanced features
Technical Data
| Max. total dynamic head (TDH) [m] | 40 |
| Max. flow rate [m3/h] | 457 |
| Open circuit voltage (Voc) [V DC] | max. 850 |
Solar Water Pump – Lorentz PS4000C Submersible
PS150 Boost
Features
- Engineered in Germany
- EC DRIVEDC brushless motors, designed for solar with over 90% efficiency
- Cast stainless steel components
- High quality non corrodible materials used throughout
- Solar direct connect with AC connection options
- MPPT technology to maximise power use from PV modules
- Optional data logger
LORENTZ PS centrifugal pumps are high quality products designed for higher flow drinking water supply, livestock watering, pond management and irrigation applications. PS centrifugal pumps provide large volumes of water economically, without pollution, anywhere.Each system consists of a pump, pump motor and a controller. This modular concept keeps all electronics above ground providing simple servicing, ease of access and a low cost of ownership.
Benefits
- Long life expectancy and proven in service record
- Designed for use in remote and harsh conditions
- Smart modular design for simple and cost effective servicing and repair
- Water filled motors for reliability and to avoid oil contamination
- Fast and simple installation
- Cost effective spare parts philosophy
- Very strong ROI against diesel powered pumping reducing production costs and reducing carbon footprint
- Large range of pumps to closely match each application and optimise efficiency
Technical Data
| Max. total dynamic head (TDH) [m] | 160 |
| Max. flow rate [m3/h] | 79 |
| Max. power voltage (Vmp)* [V DC] | > 238 |
| Open circuit voltage (Voc) [V DC] | max. 375 |
| Nominal voltage [V DC] | 168 – 192 |
| Nominal voltage [V DC] | N.A |
Solar Water Pump – Lorentz PS4000CS-F Surface
PS150 Boost
Features
- Engineered in Germany
- EC DRIVEDC brushless motors, designed for solar with over 90% efficiency
- Cast stainless steel components
- High quality non corrodible materials used throughout
- Solar direct connect with AC connection options
- MPPT technology to maximise power use from PV modules
- Optional data logger
LORENTZ PS Surface Pumps are high quality products designed for water transfer, pond management and irrigation applications where a surface pump is required. The LORENTZ PS range of DC powered surface pumps are connected to a solar generator via a controller. The controller provides inputs for monitoring storage tank levels, controlling the pump speed and uses maximum power point tracking technology to optimize the water volume that is pumped.
Benefits
- Long life expectancy and proven in service record
- Designed for use in remote and harsh conditions
- Smart modular design for simple and cost effective servicing and repair
- Water filled motors for reliability and to avoid oil contamination
- Fast and simple installation
- Cost effective spare parts philosophy
- Very strong ROI against diesel powered pumping reducing production costs and reducing carbon footprint
- Large range of pumps to closely match each application and optimise efficiency
Technical Data
| Max. total dynamic head (TDH) [m] | 70 |
| Max. flow rate [m3/h] | 59 |
| Max. power voltage (Vmp)* [V DC] | > 238 |
| Open circuit voltage (Voc) [V DC] | max. 375 |
| Nominal voltage [V DC] | 168 – 192 |
| Nominal voltage [V DC] | N.A |
Solar Water Pump – Lorentz PS4000HR Submersible
PS150 Boost
Features
- Engineered in Germany
- EC DRIVEDC brushless motors, designed for solar with over 90% efficiency
- Cast stainless steel components
- High quality non corrodible materials used throughout
- Solar direct connect with AC connection options
- MPPT technology to maximise power use from PV modules
- Optional data logger
LORENTZ PS helical rotor pumps are high quality products designed for drinking water supply, livestock watering and smaller irrigation applications. PS helical rotor pump systems deliver water economically, cleanly and reliably, anywhere.The LORENTZ PS range of DC powered helical rotor pumps have been designed specifically to pump water efficiently using solar power. The helical rotor pump is simple, efficient and reliable, pumping water with very low levels of solar power from up to 450 m below the ground.Each system consists of a pump, pump motor and a controller. This modular concept keeps all electronics above ground providing simple servicing, ease of access and a low cost of ownership.
Benefits
- Long life expectancy and proven in service record
- Designed for use in remote and harsh conditions
- Smart modular design for simple and cost effective servicing and repair
- Water filled motors for reliability and to avoid oil contamination
- Fast and simple installation
- Cost effective spare parts philosophy
- Very strong ROI against diesel powered pumping reducing production costs and reducing carbon footprint
- Large range of pumps to closely match each application and optimise efficiency
Technical Data
| Max. total dynamic head (TDH) [m] | 450 |
| Max. flow rate [m3/h] | 2.5 |
| Max. power voltage (Vmp)* [V DC] | >238 |
| Open circuit voltage (Voc) [V DC] | max. 375 |
| Nominal voltage [V DC] | 168 – 192 |
| Nominal voltage [V DC] | N.A |
Solar Water Pump – Lorentz PS40k2 Submersible
PS150 Boost
Features
- Engineered in Germany using high quality non corrodible materials
- IP54 / NEMA 3A corrosion resistant housing
- 0 – 60Hz motor speed control
- Wide range of inputs to influence pump behaviour
- Integrated monitoring and management including onboard recording of 5 years performance data, smart device access via PumpScanner Android™ App and integration to LORENTZ pumpMANAGER remote management service
- Inbuilt irradiation measurement and pump control based on power available
- Integration with the LORENTZ SmartPSU for grid / generator connection and power blending
LORENTZ PSk2 systems are our next generation of solar water pumps designed to deliver the highest volume of water across a wide range of lifts. PSk2 pumps perform equally well in irrigation projects and for a wide area of drinking water applications where they reliably meet the most demanding requirements, economically and without the use of fossil fuels or a grid connection.PSk2 provides all of the features and functions that larger scale water projects require including a wide range of sensor inputs and inbuilt monitoring and management. PSk2 is also compatible with
LORENTZ CONNECTED services for cost effective remote monitoring and management. Although technically advanced, PSk2 is simple to specify, install and maintain and provides exceptional performance driven by LORENTZ long experience of off grid solar pumping.
Benefits
- Very strong ROI against diesel powered pumping reducing production costs and reducing carbon footprint
- Advanced power management techniques to deliver the most water based on the power available
- Comprehensive inputs and outputs to provide a cost effective single unit solution
- Wide range of products to closely match each application and optimize efficiency
- Fast specification, installation and configuration allow for fast implementation and minimal downtime
- Smart modular product design for simple and cost effective product repair
- Powerful inbuilt monitoring and control features provide detailed operational information and simple access to advanced features
Technical Data
| Max. total dynamic head (TDH) [m] | 200 |
| Max. flow rate [m3/h] | 241 |
| Open circuit voltage (Voc) [V DC] | max. 850 |
Solar Water Pump – Lorentz PS40k2 Surface
PS150 Boost
Features
- Engineered in Germany using high quality non corrodible materials
- IP54 / NEMA 3A corrosion resistant housing
- 0 – 60Hz motor speed control
- Wide range of inputs to influence pump behaviour
- Integrated monitoring and management including onboard recording of 5 years performance data, smart device access via PumpScanner Android™ App and integration to LORENTZ pumpMANAGER remote management service
- Inbuilt irradiation measurement and pump control based on power available
- Integration with the LORENTZ SmartPSU for grid / generator connection and power blending
LORENTZ PSk2 systems are our next generation of solar water pumps designed to deliver the highest volume of water across a wide range of lifts. PSk2 pumps perform equally well in irrigation projects and for a wide area of drinking water applications where they reliably meet the most demanding requirements, economically and without the use of fossil fuels or a grid connection.PSk2 provides all of the features and functions that larger scale water projects require including a wide range of sensor inputs and inbuilt monitoring and management. PSk2 is also compatible with LORENTZ CONNECTED services for cost effective remote monitoring and management. Although technically advanced, PSk2 is simple to specify, install and maintain and provides exceptional performance driven by LORENTZ long experience of off grid solar pumping.
Benefits
- Very strong ROI against diesel powered pumping reducing production costs and reducing carbon footprint
- Advanced power management techniques to deliver the most water based on the power available
- Comprehensive inputs and outputs to provide a cost effective single unit solution
- Wide range of products to closely match each application and optimize efficiency
- Fast specification, installation and configuration allow for fast implementation and minimal downtime
- Smart modular product design for simple and cost effective product repair
- Powerful inbuilt monitoring and control features provide detailed operational information and simple access to advanced features
Technical Data
| Max. total dynamic head (TDH) [m] | 90 |
| Max. flow rate [m3/h] | 499 |
| Open circuit voltage (Voc) [V DC] | max. 850 |
Solar Water Pump – Lorentz PS600C Submersible
PS150 Boost
Features
- Engineered in Germany
- EC DRIVEDC brushless motors, designed for solar with over 90% efficiency
- Cast stainless steel components
- High quality non corrodible materials used throughout
- Solar direct connect with AC connection options
- MPPT technology to maximise power use from PV modules
- Optional data logger
LORENTZ PS centrifugal pumps are high quality products designed for higher flow drinking water supply, livestock watering, pond management and irrigation applications. PS centrifugal pumps provide large volumes of water economically, without pollution, anywhere.Each system consists of a pump, pump motor and a controller. This modular concept keeps all electronics above ground providing simple servicing, ease of access and a low cost of ownership.
Benefits
- Long life expectancy and proven in service record
- Designed for use in remote and harsh conditions
- Smart modular design for simple and cost effective servicing and repair
- Water filled motors for reliability and to avoid oil contamination
- Fast and simple installation
- Cost effective spare parts philosophy
- Very strong ROI against diesel powered pumping reducing production costs and reducing carbon footprint
- Large range of pumps to closely match each application and optimise efficiency
Technical Data
| Max. total dynamic head (TDH) [m] | 30 |
| Max. flow rate [m3/h] | 12 |
| Open circuit voltage (Voc) [V DC] | max. 68 |
| Nominal voltage [V DC] | 48 - 72 |
| Nominal voltage [V DC] | 48 |
Solar Water Pump – Lorentz PS600CS-F Surface
PS150 Boost
Features
- Engineered in Germany
- EC DRIVEDC brushless motors, designed for solar with over 90% efficiency
- Cast stainless steel components
- High quality non corrodible materials used throughout
- Solar direct connect with AC connection options
- MPPT technology to maximise power use from PV modules
- Optional data logger
LORENTZ PS Surface Pumps are high quality products designed for water transfer, pond management and irrigation applications where a surface pump is required. The LORENTZ PS range of DC powered surface pumps are connected to a solar generator via a controller. The controller provides inputs for monitoring storage tank levels, controlling the pump speed and uses maximum power point tracking technology to optimize the water volume that is pumped.
Benefits
- Long life expectancy and proven in service record
- Designed for use in remote and harsh conditions
- Smart modular design for simple and cost effective servicing and repair
- Fast and simple installation
- Cost effective spare parts philosophy
- Very strong ROI against diesel powered pumping reducing production costs and reducing carbon footprint
Technical Data
| Max. total dynamic head (TDH) [m] | 40 |
| Max. flow rate [m3/h] | 8.3 |
| Max. power voltage (Vmp)* [V DC] | >68 |
| Open circuit voltage (Voc) [V DC] | max. 150 |
| Nominal voltage [V DC] | 24 – 48 |
| Nominal voltage [V DC] | 48 |
Solar Water Pump – Lorentz PS600HR Submersible
PS150 Boost
Features
- Engineered in Germany
- EC DRIVEDC brushless motors, designed for solar with over 90% efficiency
- Cast stainless steel components
- High quality non corrodible materials used throughout
- Solar direct connect with AC connection options
- MPPT technology to maximise power use from PV modules
- Optional data logger
LORENTZ PS helical rotor pumps are high quality products designed for drinking water supply, livestock watering and smaller irrigation applications. PS helical rotor pump systems deliver water economically, cleanly and reliably, anywhere.The LORENTZ PS range of DC powered helical rotor pumps have been designed specifically to pump water efficiently using solar power. The helical rotor pump is simple, efficient and reliable, pumping water with very low levels of solar power from up to 450 m below the ground.Each system consists of a pump, pump motor and a controller. This modular concept keeps all electronics above ground providing simple servicing, ease of access and a low cost of ownership.
Benefits
- Long life expectancy and proven in service record
- Designed for use in remote and harsh conditions
- Smart modular design for simple and cost effective servicing and repair
- Water filled motors for reliability and to avoid oil contamination
- Fast and simple installation
- Cost effective spare parts philosophy
- Very strong ROI against diesel powered pumping reducing production costs and reducing carbon footprint
- Large range of pumps to closely match each application and optimise efficiency
Technical Data
| Max. total dynamic head (TDH) [m] | 180 |
| Max. flow rate [m3/h] | 2.6 |
| Max. power voltage (Vmp)* [V DC] | >68 |
| Open circuit voltage (Voc) [V DC] | max. 150 |
| Nominal voltage [V DC] | 48 – 72 |
| Nominal voltage [V DC] | 48 |
Solar Water Pump – Lorentz PS7k2 Submersible
PS150 Boost
Features
- Engineered in Germany using high quality non corrodible materials
- IP54 / NEMA 3A corrosion resistant housing
- 0 – 60Hz motor speed control
- Wide range of inputs to influence pump behaviour
- Integrated monitoring and management including onboard recording of 5 years performance data, smart device access via PumpScanner Android™ App and integration to LORENTZ pumpMANAGER remote management service
- Inbuilt irradiation measurement and pump control based on power available
- Integration with the LORENTZ SmartPSU for grid / generator connection and power blending
LORENTZ PSk2 systems are our next generation of solar water pumps designed to deliver the highest volume of water across a wide range of lifts. PSk2 pumps perform equally well in irrigation projects and for a wide area of drinking water applications where they reliably meet the most demanding requirements, economically and without the use of fossil fuels or a grid connection.PSk2 provides all of the features and functions that larger scale water projects require including a wide range of sensor inputs and inbuilt monitoring and management. PSk2 is also compatible with
LORENTZ CONNECTED services for cost effective remote monitoring and management. Although technically advanced, PSk2 is simple to specify, install and maintain and provides exceptional performance driven by LORENTZ long experience of off grid solar pumping.
Benefits
- Very strong ROI against diesel powered pumping reducing production costs and reducing carbon footprint
- Advanced power management techniques to deliver the most water based on the power available
- Comprehensive inputs and outputs to provide a cost effective single unit solution
- Wide range of products to closely match each application and optimize efficiency
- Fast specification, installation and configuration allow for fast implementation and minimal downtime
- Smart modular product design for simple and cost effective product repair
- Powerful inbuilt monitoring and control features provide detailed operational information and simple access to advanced features
Technical Data
| Max. total dynamic head (TDH) [m] | 80 |
| Max. flow rate [m3/h] | 128 |
| Open circuit voltage (Voc) [V DC] | max. 850 |
Solar Water Pump – Lorentz PS150-Boost Surface
PS150 Boost
Features
- Engineered in Germany using high quality non corrodible materials
- IP54 / NEMA 3A corrosion resistant housing
- 0 – 60Hz motor speed control
- Wide range of inputs to influence pump behaviour
- Integrated monitoring and management including onboard recording of 5 years performance data, smart device access via PumpScanner Android™ App and integration to LORENTZ pumpMANAGER remote management service
- Inbuilt irradiation measurement and pump control based on power available
- Integration with the LORENTZ SmartPSU for grid / generator connection and power blending
LORENTZ PSk2 systems are our next generation of solar water pumps designed to deliver the highest volume of water across a wide range of lifts. PSk2 pumps perform equally well in irrigation projects and for a wide area of drinking water applications where they reliably meet the most demanding requirements, economically and without LORENTZ PSk2 systems are our next generation of solar water pumps designed to deliver the highest volume of water across a wide range of lifts. PSk2 pumps perform equally well in irrigation projects and for a wide area of drinking water applications where they reliably meet the most demanding requirements, economically and without the use of fossil fuels or a grid connection.PSk2 provides all of the features and functions that larger scale water projects require including a wide range of sensor inputs and inbuilt monitoring and management. PSk2 is also compatible with LORENTZ CONNECTED services for cost effective remote monitoring and management. Although technically advanced, PSk2 is simple to specify, install and maintain and provides exceptional performance driven by LORENTZ long experience of off grid solar pumping. Benefits Very strong ROI against diesel powered pumping, reducing water production costs and reducing carbon footprint Advanced power management techniques to deliver the most water based on the power available Comprehensive inputs and outputs to provide a cost effective single unit solution Wide range of products to closely match each application and optimize efficiency Fast specification, installation and configuration allow for fast implementation and minimal downtime Smart modular product design for simple and cost effective product repair Powerful inbuilt monitoring and control features provide detailed operational information and simple access to advanced features Technical Data Max. total dynamic head (TDH) [m] 80 Max. flow rate [m3/h] 279 Open circuit voltage (Voc) [V DC] max. 850
Solar Water Pump – Lorentz PS150-Boost Surface
PS150 Boost
Features
- Engineered in Germany using high quality non corrodible materials
- IP54 / NEMA 3A corrosion resistant housing
- 0 – 60Hz motor speed control
- Wide range of inputs to influence pump behaviour
- Integrated monitoring and management including onboard recording of 5 years performance data, smart device access via PumpScanner Android™ App and integration to LORENTZ pumpMANAGER remote management service
- Inbuilt irradiation measurement and pump control based on power available
- Integration with the LORENTZ SmartPSU for grid / generator connection and power blending
LORENTZ PSk2 systems are our next generation of solar water pumps designed to deliver the highest volume of water across a wide range of lifts. PSk2 pumps perform equally well in irrigation projects and for a wide area of drinking water applications where they reliably meet the most demanding requirements, economically and without the use of fossil fuels or a grid connection.PSk2 provides all of the features and functions that larger scale water projects require including a wide range of sensor inputs and inbuilt monitoring and management. PSk2 is also compatible with LORENTZ CONNECTED services for cost effective remote monitoring and management. Although technically advanced, PSk2 is simple to specify, install and maintain and provides exceptional performance driven by LORENTZ long experience of off grid solar pumping. Benefits Very strong ROI against diesel powered pumping, reducing water production costs and reducing carbon footprint Advanced power management techniques to deliver the most water based on the power available Comprehensive inputs and outputs to provide a cost effective single unit solution Wide range of products to closely match each application and optimize efficiency Fast specification, installation and configuration allow for fast implementation and minimal downtime Smart modular product design for simple and cost effective product repair Powerful inbuilt monitoring and control features provide detailed operational information and simple access to advanced features
Solar Water Pump – Lorentz PS150-Boost Surface
PS150 Boost
Features
- Engineered in Germany using high quality non corrodible materials
- IP54 / NEMA 3A corrosion resistant housing
- 0 – 60Hz motor speed control
- Wide range of inputs to influence pump behaviour
- Integrated monitoring and management including onboard recording of 5 years performance data, smart device access via PumpScanner Android™ App and integration to LORENTZ pumpMANAGER remote management service
- Inbuilt irradiation measurement and pump control based on power available
- Integration with the LORENTZ SmartPSU for grid / generator connection and power blending
LORENTZ PSk2 systems are our next generation of solar water pumps designed to deliver the highest volume of water across a wide range of lifts. PSk2 pumps perform equally well in irrigation projects and for a wide area of drinking water applications where they reliably meet the most demanding requirements, economically and without LORENTZ PSk2 systems are our next generation of solar water pumps designed to deliver the highest volume of water across a wide range of lifts. PSk2 pumps perform equally well in irrigation projects and for a wide area of drinking water applications where they reliably meet the most demanding requirements, economically and without the use of fossil fuels or a grid connection.PSk2 provides all of the features and functions that larger scale water projects require including a wide range of sensor inputs and inbuilt monitoring and management. PSk2 is also compatible with LORENTZ CONNECTED services for cost effective remote monitoring and management. Although technically advanced, PSk2 is simple to specify, install and maintain and provides exceptional performance driven by LORENTZ long experience of off grid solar pumping. Benefits Very strong ROI against diesel powered pumping, reducing water production costs and reducing carbon footprint Advanced power management techniques to deliver the most water based on the power available Comprehensive inputs and outputs to provide a cost effective single unit solution Wide range of products to closely match each application and optimize efficiency Fast specification, installation and configuration allow for fast implementation and minimal downtime Smart modular product design for simple and cost effective product repair Powerful inbuilt monitoring and control features provide detailed operational information and simple access to advanced features Technical Data Max. total dynamic head (TDH) [m] 80 Max. flow rate [m3/h] 279 Open circuit voltage (Voc) [V DC] max. 850
160L Calpak Solar Water Heater – Prisma flat plate collector
In a nutshell, the Prisma offers:
- Overall higher manufacturing quality
- Increased strength and durability
- Perfect sealing against humidity
- Supreme energy performance
- Unparalleled finish (clean-cut look)
160L Calpak Solar Water Heater – Prisma 2.0 Innovative & Smart Prisma is an innovative flat plate collector patented by Calpak. It introduces in the solar thermal industry a unique polymeric material, primarily known and used in the automotive industry. This material, applied in the collector’s casing, strengthens its composite structure, achieves absolute humidity protection and offers a perfect finishing. Prisma is the result of a demanding and lengthy R&D process whereby Calpak closely collaborated with high-end technology experts. It is created by Calpak’s fully robotized production plant that ensures standardized quality. Prisma is the smart choice for adding value to your solar thermal installation! 160L Technical Specifications, Prisma 2.0 Technical Specifications Prisma 2.0 (160L) Collector Details efficiency/ heat loss coefficient no, b=78% / a1=299W/m²K absorber high selective-full plate -laser welded maximum output 1524W number of people 3-4 area (m²) 2m² frame colorfast (BASF Patented) & zinc coated alloy steel by Arcello-Mittal insulation glass wool 30mm glass tempered 3.2mm(safety), low-iron (transparency >91.5%) Tank Details capacity (lt) 155,9 tank material steel DC-03 2.5mm by Arcelor-Mittal (according to DIN 10130) welding methods/ test robotics using artificial intelligence/ double test at 15bar anti-corrosion/ cathodic protection direct enameling (according to DIN 4753/3) / magnesium rod(according to DIN 4753/6) antifreeze protection Calpak Nox (pharmaceutical polypropylene glycol) insulation injected ecological polyurethane foam(43kg/m³ density and 50mm thickness) electrical resistance 3,5 KW inox (or less) connection too boiler in triple energy models (trien) PRISMA flat plate selective collectors
160L Calpak Solar Water Heater – Prisma flat plate collector
In a nutshell, the Prisma offers:
- Overall higher manufacturing quality
- Increased strength and durability
- Perfect sealing against humidity
- Supreme energy performance
- Unparalleled finish (clean-cut look)
160L Calpak Solar Water Heater – Prisma 2.0 Innovative & Smart Prisma is an innovative flat plate collector patented by Calpak. It introduces in the solar thermal industry a unique polymeric material, primarily known and used in the automotive industry. This material, applied in the collector’s casing, strengthens its composite structure, achieves absolute humidity protection and offers a perfect finishing. Prisma is the result of a demanding and lengthy R&D process whereby Calpak closely collaborated with high-end technology experts. It is created by Calpak’s fully robotized production plant that ensures standardized quality. Prisma is the smart choice for adding value to your solar thermal installation! 160L Technical Specifications, Prisma 2.0 Technical Specifications Prisma 2.0 (160L) Collector Details efficiency/ heat loss coefficient no, b=78% / a1=299W/m²K absorber high selective-full plate -laser welded maximum output 1524W number of people 3-4 area (m²) 2m² frame colorfast (BASF Patented) & zinc coated alloy steel by Arcello-Mittal insulation glass wool 30mm glass tempered 3.2mm(safety), low-iron (transparency >91.5%) Tank Details capacity (lt) 155,9 tank material steel DC-03 2.5mm by Arcelor-Mittal (according to DIN 10130) welding methods/ test robotics using artificial intelligence/ double test at 15bar anti-corrosion/ cathodic protection direct enameling (according to DIN 4753/3) / magnesium rod(according to DIN 4753/6) antifreeze protection Calpak Nox (pharmaceutical polypropylene glycol) insulation injected ecological polyurethane foam(43kg/m³ density and 50mm thickness) electrical resistance 3,5 KW inox (or less) connection too boiler in triple energy models (trien) PRISMA flat plate selective collectors
The Victron product range includes sinewave inverters, sinewave inverters/chargers, battery chargers, DC/DC converters, transfer switches, battery monitors and more. Worldwide Victron Energy has a strong, unrivalled reputation for technical innovation, reliability, and build quality and at Energy Solutions they form a central role in many of our systems across all markets.
Solar Technology – Victron Multiplus 1200/24VDC
- Two AC Outputs
- Virtually unlimited power thanks to parallel operation
- Three phase capability
- PowerControl – Dealing with limited generator, shore side or grid power
- PowerAssist – Boosting the capacity of shore or generator power
- Solar energy: AC power available even during a grid failure
- On-site Monitoring and control
- Remote Monitoring and control
- Remote configuring
Technical Data Transfer Switch 16A Input Voltage Range (VDC) 19 - 33V Output Output voltage: 230 VAC ± 2%, Frequency: 50 Hz ± 0,1% Cont. output power at 25°C (VA) 1200 Cont. output power at 25°C (W) 1000 Peak power (W) 2400 Maximum efficiency 94% AC Input Voltage range: 187-265 VAC, frequency: 45 – 65 Hz, Power factor: 1 Charge current house battery (A 25 Operating temp. range -40 to +65°C (fan assisted cooling) Battery-connection battery cables of 1.5 meter 230 V AC-connection G-ST18i connector Weight (kg) 10 Dimensions (hxwxd in mm) 375x214x110
Solar Technology – Victron Multiplus 1600/12VDC
- Two AC Outputs
- Virtually unlimited power thanks to parallel operation
- Three phase capability
- PowerControl – Dealing with limited generator, shore side or grid power
- PowerAssist – Boosting the capacity of shore or generator power
- Solar energy: AC power available even during a grid failure
- On-site Monitoring and control
- Remote Monitoring and control
- Remote configuring
Technical Data Transfer Switch 16A Input Voltage Range (VDC) 9.5 - 17V Output Output voltage: 230 VAC ± 2%, Frequency: 50 Hz ± 0,1% Cont. output power at 25°C (VA) 1600 Cont. output power at 25°C (W) 1300 Peak power (W) 3000 Maximum efficiency 93% AC Input Voltage range: 187-265 VAC, frequency: 45 – 65 Hz, Power factor: 1 Charge current house battery (A 70 Operating temp. range -40 to +65°C (fan assisted cooling) Battery-connection battery cables of 1.5 meter 230 V AC-connection G-ST18i connector Weight (kg) 10 Dimensions (hxwxd in mm) 375x214x110
Solar Technology – Victron Multiplus 1600/12VDC
- Two AC Outputs
- Virtually unlimited power thanks to parallel operation
- Three phase capability
- PowerControl – Dealing with limited generator, shore side or grid power
- PowerAssist – Boosting the capacity of shore or generator power
- Solar energy: AC power available even during a grid failure
- On-site Monitoring and control
- Remote Monitoring and control
- Remote configuring
Technical Data Transfer Switch 16A Input Voltage Range (VDC) 19 - 33V Output Output voltage: 230 VAC ± 2%, Frequency: 50 Hz ± 0,1% Cont. output power at 25°C (VA) 1600 Cont. output power at 25°C (W) 1300 Peak power (W) 3000 Maximum efficiency 94% AC Input Voltage range: 187-265 VAC, frequency: 45 – 65 Hz, Power factor: 1 Charge current house battery (A 40 Operating temp. range -40 to +65°C (fan assisted cooling) Battery-connection battery cables of 1.5 meter 230 V AC-connection G-ST18i connector Weight (kg) 10 Dimensions (hxwxd in mm) 375x214x110
Solar Technology – Victron Multiplus 2000/12VDC
more details . . .Solar Technology – Victron Multiplus 1600/12VDC
- Two AC Outputs
- Virtually unlimited power thanks to parallel operation
- Three phase capability
- PowerControl – Dealing with limited generator, shore side or grid power
- PowerAssist – Boosting the capacity of shore or generator power
- Solar energy: AC power available even during a grid failure
- On-site Monitoring and control
- Remote Monitoring and control
- Remote configuring
Technical Data Transfer Switch 30A Input Voltage Range (VDC) 9.5 - 17V Output Output voltage: 230 VAC ± 2%, Frequency: 50 Hz ± 0,1% Cont. output power at 25°C (VA) 2000 Cont. output power at 25°C (W) 1600 Peak power (W) 4000 Maximum efficiency 93% AC Input Voltage range: 187-265 VAC, frequency: 45 – 65 Hz, Power factor: 1 Charge current house battery (A 80 Operating temp. range -40 to +65°C (fan assisted cooling) Battery-connection M8 bolts 230 V AC-connection Spring-clamp Weight (kg) 12 Dimensions (hxwxd in mm) 520x255x125
Solar Technology – Victron Multiplus 2000/24VDC
- Two AC Outputs
- Virtually unlimited power thanks to parallel operation
- Three phase capability
- PowerControl – Dealing with limited generator, shore side or grid power
- PowerAssist – Boosting the capacity of shore or generator power
- Solar energy: AC power available even during a grid failure
- On-site Monitoring and control
- Remote Monitoring and control
- Remote configuring
Technical Data Transfer Switch 30A Input Voltage Range (VDC) 19 - 33V Output Output voltage: 230 VAC ± 2%, Frequency: 50 Hz ± 0,1% Cont. output power at 25°C (VA) 2000 Cont. output power at 25°C (W) 1600 Peak power (W) 4000 Maximum efficiency 94% AC Input Voltage range: 187-265 VAC, frequency: 45 – 65 Hz, Power factor: 1 Charge current house battery (A 50 Operating temp. range -40 to +65°C (fan assisted cooling) Battery-connection M8 bolts 230 V AC-connection Spring-clamp Weight (kg) 12 Dimensions (hxwxd in mm) 520x255x125
Solar Technology – Victron Multiplus 2000/24VDC
- Two AC Outputs
- Virtually unlimited power thanks to parallel operation
- Three phase capability
- PowerControl – Dealing with limited generator, shore side or grid power
- PowerAssist – Boosting the capacity of shore or generator power
- Solar energy: AC power available even during a grid failure
- On-site Monitoring and control
- Remote Monitoring and control
- Remote configuring
Technical Data Transfer Switch 16 or 50A Input Voltage Range (VDC) 19 - 33V Output Output voltage: 230 VAC ± 2%, Frequency: 50 Hz ± 0,1% Cont. output power at 25°C (VA) 3000 Cont. output power at 25°C (W) 2400 Peak power (W) 6000 Maximum efficiency 94% AC Input Voltage range: 187-265 VAC, frequency: 45 – 65 Hz, Power factor: 1 Charge current house battery (A 70 Operating temp. range -40 to +65°C (fan assisted cooling) Battery-connection Four M8 bolts (2 plus and 2 minus connections) 230 V AC-connection Screw terminals 13 mm2 (6 AWG) Weight (kg) 18 Dimensions (hxwxd in mm) 362x258x218
Solar Technology – Victron Multiplus 2000/24VDC
- Two AC Outputs
- Virtually unlimited power thanks to parallel operation
- Three phase capability
- PowerControl – Dealing with limited generator, shore side or grid power
- PowerAssist – Boosting the capacity of shore or generator power
- Solar energy: AC power available even during a grid failure
- On-site Monitoring and control
- Remote Monitoring and control
- Remote configuring
Technical Data Transfer Switch 16 or 50A Input Voltage Range (VDC) 38 - 66V Output Output voltage: 230 VAC ± 2%, Frequency: 50 Hz ± 0,1% Cont. output power at 25°C (VA) 3000 Cont. output power at 25°C (W) 2400 Peak power (W) 6000 Maximum efficiency 95% AC Input Voltage range: 187-265 VAC, frequency: 45 – 65 Hz, Power factor: 1 Charge current house battery (A 35 Operating temp. range -40 to +65°C (fan assisted cooling) Battery-connection Four M8 bolts (2 plus and 2 minus connections) 230 V AC-connection Screw terminals 13 mm2 (6 AWG) Weight (kg) 18 Dimensions (hxwxd in mm) 362x258x218
Solar Technology – Victron Multiplus 2000/24VDC
- Two AC Outputs
- Virtually unlimited power thanks to parallel operation
- Three phase capability
- PowerControl – Dealing with limited generator, shore side or grid power
- PowerAssist – Boosting the capacity of shore or generator power
- Solar energy: AC power available even during a grid failure
- On-site Monitoring and control
- Remote Monitoring and control
- Remote configuring
Technical Data Transfer Switch 100 Input Voltage Range (VDC) 19 - 33V Output Output voltage: 230 VAC ± 2%, Frequency: 50 Hz ± 0,1% Cont. output power at 25°C (VA) 5000 Cont. output power at 25°C (W) 4000 Peak power (W) 10,000 Maximum efficiency 94% AC Input Voltage range: 187-265 VAC, frequency: 45 – 65 Hz, Power factor: 1 Charge current house battery (A 120 Operating temp. range -40 to +65°C (fan assisted cooling) Battery-connection Four M8 bolts (2 plus and 2 minus connections) 230 V AC-connection Screw terminals 13 mm2 (6 AWG) Weight (kg) 30 Dimensions (hxwxd in mm) 444x328x240
Solar Technology – Victron Multiplus 5000/48VDC
- Two AC Outputs
- Virtually unlimited power thanks to parallel operation
- Three phase capability
- PowerControl – Dealing with limited generator, shore side or grid power
- PowerAssist – Boosting the capacity of shore or generator power
- Solar energy: AC power available even during a grid failure
- On-site Monitoring and control
- Remote Monitoring and control
- Remote configuring
Technical Data Transfer Switch 100A Input Voltage Range (VDC) 38 - 66V Output Output voltage: 230 VAC ± 2%, Frequency: 50 Hz ± 0,1% Cont. output power at 25°C (VA) 5000 Cont. output power at 25°C (W) 4000 Peak power (W) 10,000 Maximum efficiency 95% AC Input Voltage range: 187-265 VAC, frequency: 45 – 65 Hz, Power factor: 1 Charge current house battery (A 70 Operating temp. range -40 to +65°C (fan assisted cooling) Battery-connection Four M8 bolts (2 plus and 2 minus connections) 230 V AC-connection Screw terminals 13 mm2 (6 AWG) Weight (kg) 30 Dimensions (hxwxd in mm) 444x328x240
Solar Technology – Victron Multiplus 5000/48VDC
Solar Technology – Victron Phoenix 350/12VDC
Phoenix 350/12
Main Features
- SinusMax – Superior engineering
- Extra start-up power
- Remote on/off switch
- DIP switch for 50/60Hz selection (48/350 model only)
- Available with different output sockets
Technical Data Cont. AC power at 25°C (VA) 350 Cont. power at 25°C / 40°C (W) 300 / 250 Peak power (W) 700 Output AC voltage / frequency 230 VAC +/- 3%, 50 Hz +/- 0,1% Input voltage range (V DC) 10.5 - 15.5 Low battery shut down (V DC) 10.5 Low battery auto recovery (V DC) 12.5 Max. efficiency (%) 89 Operating temperature range -40 to +50°C (fan assisted cooling) Weight (kg / lbs) 3,5 / 7,7 Dimensions (hxwxd in mm) 72x155x237
Solar Technology – Victron Multiplus 5000/48VDC
Solar Technology – Victron Phoenix 350/12VDC
Phoenix 350/12
Main Features
- SinusMax – Superior engineering
- Extra start-up power
- Remote on/off switch
- DIP switch for 50/60Hz selection (48/350 model only)
- Available with different output sockets
Technical Data Cont. AC power at 25°C (VA) 350 Cont. power at 25°C / 40°C (W) 300 / 250 Peak power (W) 700 Output AC voltage / frequency 230 VAC +/- 3%, 50 Hz +/- 0,1% Input voltage range (V DC) 10.5 - 15.5 Low battery shut down (V DC) 10.5 Low battery auto recovery (V DC) 12.5 Max. efficiency (%) 89 Operating temperature range -40 to +50°C (fan assisted cooling) Weight (kg / lbs) 3,5 / 7,7 Dimensions (hxwxd in mm) 72x155x237
Solar Technology – Victron Multiplus 5000/48VDC
Solar Technology – Victron Phoenix 350/12VDC
Phoenix 350/12
Main Features
- SinusMax – Superior engineering
- Extra start-up power
- Remote on/off switch
- DIP switch for 50/60Hz selection (48/350 model only)
- Available with different output sockets
Technical Data Cont. AC power at 25°C (VA) 350 Cont. power at 25°C / 40°C (W) 300 / 250 Peak power (W) 700 Output AC voltage / frequency 230 VAC +/- 3%, 50 Hz +/- 0,1% Input voltage range (V DC) 10.5 - 15.5 Low battery shut down (V DC) 10.5 Low battery auto recovery (V DC) 12.5 Max. efficiency (%) 89 Operating temperature range -40 to +50°C (fan assisted cooling) Weight (kg / lbs) 3,5 / 7,7 Dimensions (hxwxd in mm) 72x155x237
Solar Technology – Victron Quattro 10000/48VDC
- Two AC Outputs
- Virtually unlimited power thanks to parallel operation
- Three phase capability
- PowerControl – Dealing with limited generator, shore side or grid power
- PowerAssist – Boosting the capacity of shore or generator power
- Solar energy: AC power available even during a grid failure
- On-site Monitoring and control
- Remote Monitoring and control
- Remote configuring
Technical Data Transfer Switch 16A Input Voltage Range (VDC) 19 - 33V Output Output voltage: 230 VAC ± 2%, Frequency: 50 Hz ± 0,1% Cont. output power at 25°C (VA) 1200 Cont. output power at 25°C (W) 1000 Peak power (W) 2400 Maximum efficiency 94% AC Input Voltage range: 187-265 VAC, frequency: 45 – 65 Hz, Power factor: 1 Charge current house battery (A 25 Operating temp. range -40 to +65°C (fan assisted cooling) Battery-connection battery cables of 1.5 meter 230 V AC-connection G-ST18i connector Weight (kg) 10 Dimensions (hxwxd in mm) 375x214x110
Solar Technology – Victron Quattro 15000/48VDC
- Two AC Outputs
- Virtually unlimited power thanks to parallel operation
- Three phase capability
- PowerControl – Dealing with limited generator, shore side or grid power
- PowerAssist – Boosting the capacity of shore or generator power
- Solar energy: AC power available even during a grid failure
- On-site Monitoring and control
- Remote Monitoring and control
- Remote configuring
Technical Data Transfer Switch 16A Input Voltage Range (VDC) 19 - 33V Output Output voltage: 230 VAC ± 2%, Frequency: 50 Hz ± 0,1% Cont. output power at 25°C (VA) 1200 Cont. output power at 25°C (W) 1000 Peak power (W) 2400 Maximum efficiency 94% AC Input Voltage range: 187-265 VAC, frequency: 45 – 65 Hz, Power factor: 1 Charge current house battery (A 25 Operating temp. range -40 to +65°C (fan assisted cooling) Battery-connection battery cables of 1.5 meter 230 V AC-connection G-ST18i connector Weight (kg) 10 Dimensions (hxwxd in mm) 375x214x110
Solar Technology – Victron Quattro 3000/12VDC
- Two AC Outputs
- Virtually unlimited power thanks to parallel operation
- Three phase capability
- PowerControl – Dealing with limited generator, shore side or grid power
- PowerAssist – Boosting the capacity of shore or generator power
- Solar energy: AC power available even during a grid failure
- On-site Monitoring and control
- Remote Monitoring and control
- Remote configuring
Technical Data Transfer Switch 16A Input Voltage Range (VDC) 19 - 33V Output Output voltage: 230 VAC ± 2%, Frequency: 50 Hz ± 0,1% Cont. output power at 25°C (VA) 1200 Cont. output power at 25°C (W) 1000 Peak power (W) 2400 Maximum efficiency 94% AC Input Voltage range: 187-265 VAC, frequency: 45 – 65 Hz, Power factor: 1 Charge current house battery (A 25 Operating temp. range -40 to +65°C (fan assisted cooling) Battery-connection battery cables of 1.5 meter 230 V AC-connection G-ST18i connector Weight (kg) 10 Dimensions (hxwxd in mm) 375x214x110
Solar Technology – Victron Quattro 3000/24VDC
- Two AC Outputs
- Virtually unlimited power thanks to parallel operation
- Three phase capability
- PowerControl – Dealing with limited generator, shore side or grid power
- PowerAssist – Boosting the capacity of shore or generator power
- Solar energy: AC power available even during a grid failure
- On-site Monitoring and control
- Remote Monitoring and control
- Remote configuring
Technical Data Transfer Switch 16A Input Voltage Range (VDC) 19 - 33V Output Output voltage: 230 VAC ± 2%, Frequency: 50 Hz ± 0,1% Cont. output power at 25°C (VA) 1200 Cont. output power at 25°C (W) 1000 Peak power (W) 2400 Maximum efficiency 94% AC Input Voltage range: 187-265 VAC, frequency: 45 – 65 Hz, Power factor: 1 Charge current house battery (A 25 Operating temp. range -40 to +65°C (fan assisted cooling) Battery-connection battery cables of 1.5 meter 230 V AC-connection G-ST18i connector Weight (kg) 10 Dimensions (hxwxd in mm) 375x214x110
Solar Technology – Victron Multiplus 1200/24VDC
- Two AC Outputs
- Virtually unlimited power thanks to parallel operation
- Three phase capability
- PowerControl – Dealing with limited generator, shore side or grid power
- PowerAssist – Boosting the capacity of shore or generator power
- Solar energy: AC power available even during a grid failure
- On-site Monitoring and control
- Remote Monitoring and control
- Remote configuring
Technical Data Transfer Switch 16A Input Voltage Range (VDC) 19 - 33V Output Output voltage: 230 VAC ± 2%, Frequency: 50 Hz ± 0,1% Cont. output power at 25°C (VA) 1200 Cont. output power at 25°C (W) 1000 Peak power (W) 2400 Maximum efficiency 94% AC Input Voltage range: 187-265 VAC, frequency: 45 – 65 Hz, Power factor: 1 Charge current house battery (A 25 Operating temp. range -40 to +65°C (fan assisted cooling) Battery-connection battery cables of 1.5 meter 230 V AC-connection G-ST18i connector Weight (kg) 10 Dimensions (hxwxd in mm) 375x214x110
Solar Technology – Victron Quattro 5000/24VDC
- Two AC Outputs
- Virtually unlimited power thanks to parallel operation
- Three phase capability
- PowerControl – Dealing with limited generator, shore side or grid power
- PowerAssist – Boosting the capacity of shore or generator power
- Solar energy: AC power available even during a grid failure
- On-site Monitoring and control
- Remote Monitoring and control
- Remote configuring
Technical Data Transfer Switch 16A Input Voltage Range (VDC) 19 - 33V Output Output voltage: 230 VAC ± 2%, Frequency: 50 Hz ± 0,1% Cont. output power at 25°C (VA) 1200 Cont. output power at 25°C (W) 1000 Peak power (W) 2400 Maximum efficiency 94% AC Input Voltage range: 187-265 VAC, frequency: 45 – 65 Hz, Power factor: 1 Charge current house battery (A 25 Operating temp. range -40 to +65°C (fan assisted cooling) Battery-connection battery cables of 1.5 meter 230 V AC-connection G-ST18i connector Weight (kg) 10 Dimensions (hxwxd in mm) 375x214x110
Solar Technology – Victron Quattro 5000/48VDC
- Two AC Outputs
- Virtually unlimited power thanks to parallel operation
- Three phase capability
- PowerControl – Dealing with limited generator, shore side or grid power
- PowerAssist – Boosting the capacity of shore or generator power
- Solar energy: AC power available even during a grid failure
- On-site Monitoring and control
- Remote Monitoring and control
- Remote configuring
Technical Data Transfer Switch 16A Input Voltage Range (VDC) 19 - 33V Output Output voltage: 230 VAC ± 2%, Frequency: 50 Hz ± 0,1% Cont. output power at 25°C (VA) 1200 Cont. output power at 25°C (W) 1000 Peak power (W) 2400 Maximum efficiency 94% AC Input Voltage range: 187-265 VAC, frequency: 45 – 65 Hz, Power factor: 1 Charge current house battery (A 25 Operating temp. range -40 to +65°C (fan assisted cooling) Battery-connection battery cables of 1.5 meter 230 V AC-connection G-ST18i connector Weight (kg) 10 Dimensions (hxwxd in mm) 375x214x110
Solar Technology – Victron Quattro 8000/24VDC
- Two AC Outputs
- Virtually unlimited power thanks to parallel operation
- Three phase capability
- PowerControl – Dealing with limited generator, shore side or grid power
- PowerAssist – Boosting the capacity of shore or generator power
- Solar energy: AC power available even during a grid failure
- On-site Monitoring and control
- Remote Monitoring and control
- Remote configuring
Technical Data Transfer Switch 16A Input Voltage Range (VDC) 19 - 33V Output Output voltage: 230 VAC ± 2%, Frequency: 50 Hz ± 0,1% Cont. output power at 25°C (VA) 1200 Cont. output power at 25°C (W) 1000 Peak power (W) 2400 Maximum efficiency 94% AC Input Voltage range: 187-265 VAC, frequency: 45 – 65 Hz, Power factor: 1 Charge current house battery (A 25 Operating temp. range -40 to +65°C (fan assisted cooling) Battery-connection battery cables of 1.5 meter 230 V AC-connection G-ST18i connector Weight (kg) 10 Dimensions (hxwxd in mm) 375x214x110
Solar Technology – Victron Quattro 8000/48VDC
- Two AC Outputs
- Virtually unlimited power thanks to parallel operation
- Three phase capability
- PowerControl – Dealing with limited generator, shore side or grid power
- PowerAssist – Boosting the capacity of shore or generator power
- Solar energy: AC power available even during a grid failure
- On-site Monitoring and control
- Remote Monitoring and control
- Remote configuring
Technical Data Transfer Switch 16A Input Voltage Range (VDC) 19 - 33V Output Output voltage: 230 VAC ± 2%, Frequency: 50 Hz ± 0,1% Cont. output power at 25°C (VA) 1200 Cont. output power at 25°C (W) 1000 Peak power (W) 2400 Maximum efficiency 94% AC Input Voltage range: 187-265 VAC, frequency: 45 – 65 Hz, Power factor: 1 Charge current house battery (A 25 Operating temp. range -40 to +65°C (fan assisted cooling) Battery-connection battery cables of 1.5 meter 230 V AC-connection G-ST18i connector Weight (kg) 10 Dimensions (hxwxd in mm) 375x214x110
Victron Multiplus 3000/12VDC
- Two AC Outputs
- Virtually unlimited power thanks to parallel operation
- Three phase capability
- PowerControl – Dealing with limited generator, shore side or grid power
- PowerAssist – Boosting the capacity of shore or generator power
- Solar energy: AC power available even during a grid failure
- On-site Monitoring and control
- Remote Monitoring and control
- Remote configuring
Technical Data Transfer Switch 16A Input Voltage Range (VDC) 19 - 33V Output Output voltage: 230 VAC ± 2%, Frequency: 50 Hz ± 0,1% Cont. output power at 25°C (VA) 1200 Cont. output power at 25°C (W) 1000 Peak power (W) 2400 Maximum efficiency 94% AC Input Voltage range: 187-265 VAC, frequency: 45 – 65 Hz, Power factor: 1 Charge current house battery (A 25 Operating temp. range -40 to +65°C (fan assisted cooling) Battery-connection battery cables of 1.5 meter 230 V AC-connection G-ST18i connector Weight (kg) 10 Dimensions (hxwxd in mm) 375x214x110
OutBack Power is a privately held company headquartered in Arlington, WA, and is the leading designer and manufacturer of advanced power electronics for renewable energy, backup power, marine and mobile applications. The company is also a member of The Alpha Group — a global alliance of independent companies that share a common philosophy: create world-class powering solutions for communication, commercial, industrial and renewable energy markets. With an emphasis on product performance OutBack has established itself as the product of choice in harsh environmental conditions and applications where product reliability is paramount. Whether the application is village micro-grids in Africa, rural electrification projects in Latin America, remote off-grid cabins in Alaska, or a suburban home in Southern California, OutBack Power has set the bar for delivering high quality, cutting edge power conversion electronics.
Solar Technology – Outback 2000VA/12VDC Sealed
FXR2012E
- Single-phase, 230V Sinewave Output in 12V, 24V, or 48V Versions
- 2000W and 2300W Sealed Models
- 2600W and 3000W Vented Models
- Programmable for Seven Different Modes with Generator Assist
- Modular, Stackable Design for up to Nine Inverters in Three-phase and 10 Inverters in Grid-tied
- Up to 93% Operating Efficiency
- Field Upgradable Software
- Standard 5-Year Warranty with Optional 10-Year
The latest, most advanced features on the industry’s most trusted and proven platform—that’s the essence of OutBack’s new FXR Series of Grid/Hybrid inverter/chargers. Capable of off-grid or grid-connected operation in a single model, the FXR Grid/Hybrid inverter/chargers provide system designers with unprecedented flexibility and compatibility for nearly any power conversion scenario.
The new FXR features and technologies on the acclaimed FX platform include:
- Both off-grid and grid-tied functionality in one unit
- Seven programmable modes, including GridZero and Support Mode, and built-in networked communications
- Advanced Battery Charging (ABC) with expanded charging voltages and time parameters, enabling system designers to accommodate the specific charging profiles and algorithms of new and emerging energy storage technologies including Lithium Ion, Aqueous Ion and Flow Chemistry batteries
- Easy system upgradability in the field
FXR inverter/chargers can be paired with a MATE3 to add OPTICS RE to monitor and control system performance from any location. Available in power ranges from 2000W-3000W, multiple units may be stacked and connected with other OutBack Power electronics for more seamless system integration and the ability to function in a wide variety of applications, and system sizes. Up to nine inverters can be combined in a 3-phase system with the 12V, 24V or 48V models, and up to 30kW in a grid-tied 24V or 48V system. The exclusive modular system architecture means that increased power output is just an additional FXR inverter/charger away.
Available in sealed or vented units with NEMA type 1 die-cast aluminum chassis designed to operate in the harshest environmental conditions such as high temperatures, humidity or corrosive salt air, the FXR’s continue in OutBack’s tradition of absolute dependability in mission critical installations no matter how harsh or challenging the conditions.
| Technical Data | |
| Continuous Power | 2000VA |
| AC Output Voltage (selectable) | 230VAC (200-260) |
| Frequency Output | 50Hz or 60Hz |
| Norninal DC Input Voltage | 12VDC |
| Efficiency | 92% |
| Output Voltage Regulation | +/- 2.5% |
| DC Input Voltage Range | 10.5 to 17VDC |
| Warranty | Standard 5 years |
| Weight | 29Kgs |
| Dimensions H x W x L | 33 x 21 x 41 |
| Operating Temp | -40 to +60°C |
Solar Technology – Outback 2000VA/24VDC Sealed
FXR2024E
- Single-phase, 230V Sinewave Output in 12V, 24V, or 48V Versions
- 2000W and 2300W Sealed Models
- 2600W and 3000W Vented Models
- Programmable for Seven Different Modes with Generator Assist
- Modular, Stackable Design for up to Nine Inverters in Three-phase and 10 Inverters in Grid-tied
- Up to 93% Operating Efficiency
- Field Upgradable Software
- Standard 5-Year Warranty with Optional 10-Year
The latest, most advanced features on the industry’s most trusted and proven platform—that’s the essence of OutBack’s new FXR Series of Grid/Hybrid inverter/chargers. Capable of off-grid or grid-connected operation in a single model, the FXR Grid/Hybrid inverter/chargers provide system designers with unprecedented flexibility and compatibility for nearly any power conversion scenario.
The new FXR features and technologies on the acclaimed FX platform include:
- Both off-grid and grid-tied functionality in one unit
- Seven programmable modes, including GridZero and Support Mode, and built-in networked communications
- Advanced Battery Charging (ABC) with expanded charging voltages and time parameters, enabling system designers to accommodate the specific charging profiles and algorithms of new and emerging energy storage technologies including Lithium Ion, Aqueous Ion and Flow Chemistry batteries
- Easy system upgradability in the field
FXR inverter/chargers can be paired with a MATE3 to add OPTICS RE to monitor and control system performance from any location. Available in power ranges from 2000W-3000W, multiple units may be stacked and connected with other OutBack Power electronics for more seamless system integration and the ability to function in a wide variety of applications, and system sizes. Up to nine inverters can be combined in a 3-phase system with the 12V, 24V or 48V models, and up to 30kW in a grid-tied 24V or 48V system. The exclusive modular system architecture means that increased power output is just an additional FXR inverter/charger away.
Available in sealed or vented units with NEMA type 1 die-cast aluminum chassis designed to operate in the harshest environmental conditions such as high temperatures, humidity or corrosive salt air, the FXR’s continue in OutBack’s tradition of absolute dependability in mission critical installations no matter how harsh or challenging the conditions.
| Technical Data | |
| Continuous Power | 2000VA |
| AC Output Voltage (selectable) | 230VAC (200-260) |
| Frequency Output | 50Hz or 60Hz |
| Norninal DC Input Voltage | 12VDC |
| Efficiency | 92% |
| Output Voltage Regulation | +/- 2.5% |
| DC Input Voltage Range | 10.5 to 17VDC |
| Warranty | Standard 5 years |
| Weight | 29Kgs |
| Dimensions H x W x L | 33 x 21 x 41 |
| Operating Temp | -40 to +60°C |
Solar Technology – Outback 2000VA/12VDC Sealed
FXR2012E
- Single-phase, 230V Sinewave Output in 12V, 24V, or 48V Versions
- 2000W and 2300W Sealed Models
- 2600W and 3000W Vented Models
- Programmable for Seven Different Modes with Generator Assist
- Modular, Stackable Design for up to Nine Inverters in Three-phase and 10 Inverters in Grid-tied
- Up to 93% Operating Efficiency
- Field Upgradable Software
- Standard 5-Year Warranty with Optional 10-Year
The latest, most advanced features on the industry’s most trusted and proven platform—that’s the essence of OutBack’s new FXR Series of Grid/Hybrid inverter/chargers. Capable of off-grid or grid-connected operation in a single model, the FXR Grid/Hybrid inverter/chargers provide system designers with unprecedented flexibility and compatibility for nearly any power conversion scenario.
The new FXR features and technologies on the acclaimed FX platform include:
- Both off-grid and grid-tied functionality in one unit
- Seven programmable modes, including GridZero and Support Mode, and built-in networked communications
- Advanced Battery Charging (ABC) with expanded charging voltages and time parameters, enabling system designers to accommodate the specific charging profiles and algorithms of new and emerging energy storage technologies including Lithium Ion, Aqueous Ion and Flow Chemistry batteries
- Easy system upgradability in the field
FXR inverter/chargers can be paired with a MATE3 to add OPTICS RE to monitor and control system performance from any location. Available in power ranges from 2000W-3000W, multiple units may be stacked and connected with other OutBack Power electronics for more seamless system integration and the ability to function in a wide variety of applications, and system sizes. Up to nine inverters can be combined in a 3-phase system with the 12V, 24V or 48V models, and up to 30kW in a grid-tied 24V or 48V system. The exclusive modular system architecture means that increased power output is just an additional FXR inverter/charger away.
Available in sealed or vented units with NEMA type 1 die-cast aluminum chassis designed to operate in the harshest environmental conditions such as high temperatures, humidity or corrosive salt air, the FXR’s continue in OutBack’s tradition of absolute dependability in mission critical installations no matter how harsh or challenging the conditions.
| Technical Data | |
| Continuous Power | 2000VA |
| AC Output Voltage (selectable) | 230VAC (200-260) |
| Frequency Output | 50Hz or 60Hz |
| Norninal DC Input Voltage | 12VDC |
| Efficiency | 92% |
| Output Voltage Regulation | +/- 2.5% |
| DC Input Voltage Range | 10.5 to 17VDC |
| Warranty | Standard 5 years |
| Weight | 29Kgs |
| Dimensions H x W x L | 33 x 21 x 41 |
| Operating Temp | -40 to +60°C |
Solar Technology – Outback 2600VA/12VDC Vented
GVFX2612E
- Sine wave output
- Intelligent battery charging
- Up to 16 kVA
- “Bug-proof” chassis
- Field serviceable
The OutBack International Series true sine wave grid-interactive inverter/charger is a complete power solution. The International Series is designed for use in 50 Hz countries that have utility grids with nominal AC voltages of 230 VAC / 50Hz. For areas that frequently experience high or low power conditions such as surges, spikes or brownouts, or have trouble syncing to the utility grid, the International Series grid reconnect timers have been shortened to reduce overall system downtime and improve system functionality. Incorporating a DC to AC sine wave inverter, battery charger and AC transfer switch housed within a die-cast aluminum chassis, the International Series GTFX and GVFX Inverter/Chargers give you the ability to sell solar, wind or hydro power back to the utility grid while providing instantaneous backup power in the event of a utility outage. Our built-in transfer switch automatically disconnects your loads from the utility grid and powers them from the inverter in the event of an outage, allowing you to continue using your solar and battery backup power, unlike traditional grid-tie systems. Intelligent multi-stage battery charging prolongs the life of your batteries and built-in networked communications allow for simultaneous communications of up to 10 OutBack Power components within the system. The exclusive modular system architecture means that increased power output is just an additional inverter/charger away. Our International Series GTFX uses a sealed chassis that can operate in the harshest environmental conditions such as high humidity and corrosive salt air while the International Series GVFX uses a vented chassis with “bug-proof” screened openings that allow high output AC power for various operating conditions. OutBack Power inverter/chargers are the only choice when you need a true sine wave, powerful, modular and reliable power solution for your home, business or extreme application. Technical Data Continuous Power 2600VA AC Output Voltage (selectable) 230VAC (200-260) Frequency Output 50Hz or 60Hz Norninal DC Input Voltage 12VDC Efficiency 90% Output Voltage Regulation +/- 2.5% DC Input Voltage Range 10.2 to 17DC Warranty Standard 5 years Weight 28Kgs Dimensions H x W x L 30 x 21 x 41 Operating Temp -40 to +60°C
Solar Technology – Outback 2600VA/12VDC Vented
GVFX2612E
- Sine wave output
- Intelligent battery charging
- Up to 16 kVA
- “Bug-proof” chassis
- Field serviceable
The OutBack International Series true sine wave grid-interactive inverter/charger is a complete power solution. The International Series is designed for use in 50 Hz countries that have utility grids with nominal AC voltages of 230 VAC / 50Hz. For areas that frequently experience high or low power conditions such as surges, spikes or brownouts, or have trouble syncing to the utility grid, the International Series grid reconnect timers have been shortened to reduce overall system downtime and improve system functionality.
Incorporating a DC to AC sine wave inverter, battery charger and AC transfer switch housed within a die-cast aluminum chassis, the International Series GTFX and GVFX Inverter/Chargers give you the ability to sell solar, wind or hydro power back to the utility grid while providing instantaneous backup power in the event of a utility outage.
Our built-in transfer switch automatically disconnects your loads from the utility grid and powers them from the inverter in the event of an outage, allowing you to continue using your solar and battery backup power, unlike traditional grid-tie systems. Intelligent multi-stage battery charging prolongs the life of your batteries and built-in networked communications allow for simultaneous communications of up to 10 OutBack Power components within the system. The exclusive modular system architecture means that increased power output is just an additional inverter/charger away. Our International Series GTFX uses a sealed chassis that can operate in the harshest environmental conditions such as high humidity and corrosive salt air while the International Series GVFX uses a vented chassis with “bug-proof” screened openings that allow high output AC power for various operating conditions.
OutBack Power inverter/chargers are the only choice when you need a true sine wave, powerful, modular and reliable power solution for your home, business or extreme application.
| Technical Data | |
| Continuous Power | 2600VA |
| AC Output Voltage (selectable) | 230VAC (200-260) |
| Frequency Output | 50Hz or 60Hz |
| Norninal DC Input Voltage | 12VDC |
| Efficiency | 90% |
| Output Voltage Regulation | +/- 2.5% |
| DC Input Voltage Range | 10.2 to 17DC |
| Warranty | Standard 5 years |
| Weight | 28Kgs |
| Dimensions H x W x L | 30 x 21 x 41 |
| Operating Temp | -40 to +60°C |
Solar Technology – Outback 2600VA/12VDC Vented
GVFX2612E
- Sine wave output
- Intelligent battery charging
- Up to 16 kVA
- “Bug-proof” chassis
- Field serviceable
The OutBack International Series true sine wave grid-interactive inverter/charger is a complete power solution. The International Series is designed for use in 50 Hz countries that have utility grids with nominal AC voltages of 230 VAC / 50Hz. For areas that frequently experience high or low power conditions such as surges, spikes or brownouts, or have trouble syncing to the utility grid, the International Series grid reconnect timers have been shortened to reduce overall system downtime and improve system functionality.
Incorporating a DC to AC sine wave inverter, battery charger and AC transfer switch housed within a die-cast aluminum chassis, the International Series GTFX and GVFX Inverter/Chargers give you the ability to sell solar, wind or hydro power back to the utility grid while providing instantaneous backup power in the event of a utility outage.
Our built-in transfer switch automatically disconnects your loads from the utility grid and powers them from the inverter in the event of an outage, allowing you to continue using your solar and battery backup power, unlike traditional grid-tie systems. Intelligent multi-stage battery charging prolongs the life of your batteries and built-in networked communications allow for simultaneous communications of up to 10 OutBack Power components within the system. The exclusive modular system architecture means that increased power output is just an additional inverter/charger away. Our International Series GTFX uses a sealed chassis that can operate in the harshest environmental conditions such as high humidity and corrosive salt air while the International Series GVFX uses a vented chassis with “bug-proof” screened openings that allow high output AC power for various operating conditions.
OutBack Power inverter/chargers are the only choice when you need a true sine wave, powerful, modular and reliable power solution for your home, business or extreme application.
| Technical Data | |
| Continuous Power | 2600VA |
| AC Output Voltage (selectable) | 230VAC (200-260) |
| Frequency Output | 50Hz or 60Hz |
| Norninal DC Input Voltage | 12VDC |
| Efficiency | 90% |
| Output Voltage Regulation | +/- 2.5% |
| DC Input Voltage Range | 10.2 to 17DC |
| Warranty | Standard 5 years |
| Weight | 28Kgs |
| Dimensions H x W x L | 30 x 21 x 41 |
| Operating Temp | -40 to +60°C |
Solar Technology – Outback 3500VA/48VDC Radian Series
GS3548E
- Grid-interactive and stand-alone capability in the same package
- 7000 and 3500 Watts of continuous power, respectively
- GridZero Technology minimizes grid dependence
- Unsurpassed surge capacity
- Field adjustable input/output voltage and frequency boundries
- Dual AC inputs
- Field serviceable modular design
- GSLC load center option allows for quick and easy installation
The OutBack International Series true sine wave grid-interactive inverter/charger is a complete power solution. The International Series is designed for use in 50 Hz countries that have utility grids with nominal AC voltages of 230 VAC / 50Hz. For areas that frequently experience high or low power conditions such as surges, spikes or brownouts, or have trouble syncing to the utility grid, the International Series grid reconnect timers have been shortened to reduce overall system downtime and improve system functionality.
Incorporating a DC to AC sine wave inverter, battery charger and AC transfer switch housed within a die-cast aluminum chassis, the International Series GTFX and GVFX Inverter/Chargers give you the ability to sell solar, wind or hydro power back to the utility grid while providing instantaneous backup power in the event of a utility outage.
Our built-in transfer switch automatically disconnects your loads from the utility grid and powers them from the inverter in the event of an outage, allowing you to continue using your solar and battery backup power, unlike traditional grid-tie systems. Intelligent multi-stage battery charging prolongs the life of your batteries and built-in networked communications allow for simultaneous communications of up to 10 OutBack Power components within the system. The exclusive modular system architecture means that increased power output is just an additional inverter/charger away. Our International Series GTFX uses a sealed chassis that can operate in the harshest environmental conditions such as high humidity and corrosive salt air while the International Series GVFX uses a vented chassis with “bug-proof” screened openings that allow high output AC power for various operating conditions.
OutBack Power inverter/chargers are the only choice when you need a true sine wave, powerful, modular and reliable power solution for your home, business or extreme application.
| Technical Data | |
| Continuous Power | 2600VA |
| AC Output Voltage (selectable) | 230VAC (200-260) |
| Frequency Output | 50Hz or 60Hz |
| Norninal DC Input Voltage | 12VDC |
| Efficiency | 90% |
| Output Voltage Regulation | +/- 2.5% |
| DC Input Voltage Range | 10.2 to 17DC |
| Warranty | Standard 5 years |
| Weight | 28Kgs |
| Dimensions H x W x L | 30 x 21 x 41 |
| Operating Temp | -40 to +60°C |
Solar Technology – Outback 3500VA/48VDC Radian Series
GS3548E
- Grid-interactive and stand-alone capability in the same package
- 7000 and 3500 Watts of continuous power, respectively
- GridZero Technology minimizes grid dependence
- Unsurpassed surge capacity
- Field adjustable input/output voltage and frequency boundries
- Dual AC inputs
- Field serviceable modular design
- GSLC load center option allows for quick and easy installation
Radian Series GS7048E and 3548E Grid/Hybrid™ (full-flexibility grid-interactive/off-grid) Inverter/Charger is engineered toward one goal: making system design and installation easier and faster in grid-interactive and comprehensive off-grid applications. Both the GS7048E and the GS3548E feature dual AC inputs for grid/generator flexibility with no external switching required, unparalleled surge capability and operational stability,easy field upgradeability and stacking capability for large system scaling, simplified system commissioning through a powerful, easy-to-use configuration wizard, and multi-mode operational flexibility.
In addition, both models have new Advanced Battery Charging (ABC) profile options to support leading-edge battery technologies such as Lithium-Ion and others, and enhanced diagnostics for improved performance. And both incorporate OutBack’s GridZero technology, a superior level of intelligence in energy management for self-generation and self-consumption programs,providing precise balancing between using stored energy, solar and utility power, blending-in the latter to overcome surges and load spikes when needed. GridZero operation makes it possible for a smaller inverter and battery system to perform like a much larger one when required, putting stored and renewable energy sources to work and minimizing grid dependence.
As truly global products, the Radian Series GS7048E and GS3548E inverter/chargers offer selectable voltage and frequency for use in a wide variety of locations, and innovative grid interface protection, which allows precision programming and control to accommodate shifting utility requirements in areas with high PV penetration or specific interconnection requirements.
The GS7048E and GS3548E are IEC certified to meet the most stringent worldwide PV safety and emission standards.
| Technical Data | |
| Continuous Power | 3500VA |
| AC Output Voltage (selectable) | 230VAC (200-260) |
| Frequency Output | 50Hz or 60Hz |
| Norninal DC Input Voltage | 48VDC |
| Efficiency | 93% |
| Output Voltage Regulation | +/- 2.0% |
| DC Input Voltage Range | 40 to 64VDC |
| Warranty | Standard 5 years |
| Weight | 42.1Kgs |
| Dimensions H x W x L | 71.1 x 40.6 x 22.1 |
| Operating Temp | -40 to +60°C |
Solar Technology – Outback 3500VA/48VDC Radian Series
GS3548E
- Grid-interactive and stand-alone capability in the same package
- 7000 and 3500 Watts of continuous power, respectively
- GridZero Technology minimizes grid dependence
- Unsurpassed surge capacity
- Field adjustable input/output voltage and frequency boundries
- Dual AC inputs
- Field serviceable modular design
- GSLC load center option allows for quick and easy installation
Radian Series GS7048E and 3548E Grid/Hybrid™ (full-flexibility grid-interactive/off-grid) Inverter/Charger is engineered toward one goal: making system design and installation easier and faster in grid-interactive and comprehensive off-grid applications. Both the GS7048E and the GS3548E feature dual AC inputs for grid/generator flexibility with no external switching required, unparalleled surge capability and operational stability,easy field upgradeability and stacking capability for large system scaling, simplified system commissioning through a powerful, easy-to-use configuration wizard, and multi-mode operational flexibility.
In addition, both models have new Advanced Battery Charging (ABC) profile options to support leading-edge battery technologies such as Lithium-Ion and others, and enhanced diagnostics for improved performance. And both incorporate OutBack’s GridZero technology, a superior level of intelligence in energy management for self-generation and self-consumption programs,providing precise balancing between using stored energy, solar and utility power, blending-in the latter to overcome surges and load spikes when needed. GridZero operation makes it possible for a smaller inverter and battery system to perform like a much larger one when required, putting stored and renewable energy sources to work and minimizing grid dependence.
As truly global products, the Radian Series GS7048E and GS3548E inverter/chargers offer selectable voltage and frequency for use in a wide variety of locations, and innovative grid interface protection, which allows precision programming and control to accommodate shifting utility requirements in areas with high PV penetration or specific interconnection requirements.
The GS7048E and GS3548E are IEC certified to meet the most stringent worldwide PV safety and emission standards.
| Technical Data | |
| Continuous Power | 3500VA |
| AC Output Voltage (selectable) | 230VAC (200-260) |
| Frequency Output | 50Hz or 60Hz |
| Norninal DC Input Voltage | 48VDC |
| Efficiency | 93% |
| Output Voltage Regulation | +/- 2.0% |
| DC Input Voltage Range | 40 to 64VDC |
| Warranty | Standard 5 years |
| Weight | 42.1Kgs |
| Dimensions H x W x L | 71.1 x 40.6 x 22.1 |
| Operating Temp | -40 to +60°C |
Solar Battery – Victron 110AH 12V Deep Cycle AGM
VRLA stands for Valve Regulated Lead Acid, which means the batteries are sealed. Gas will escape through the safety valves only in case of overcharging or cell failure. VRLA batteries are maintenance free for life. AGM stands for Absorbent Glass Mat. In these batteries the electrolyte is absorbed into a glass-fibre mat between the plates by capillary action. As explained in our book ‘Energy Unlimited’, AGM batteries are more suitable for short-time delivery of very high currents (engine starting) than gel batteries
Solar Battery – Victron 110AH 12V Deep Cycle AGM
VRLA stands for Valve Regulated Lead Acid, which means the batteries are sealed. Gas will escape through the safety valves only in case of overcharging or cell failure. VRLA batteries are maintenance free for life. AGM stands for Absorbent Glass Mat. In these batteries the electrolyte is absorbed into a glass-fibre mat between the plates by capillary action. As explained in our book ‘Energy Unlimited’, AGM batteries are more suitable for short-time delivery of very high currents (engine starting) than gel batteries
Solar Battery – Victron 110AH 12V Deep Cycle AGM
VRLA stands for Valve Regulated Lead Acid, which means the batteries are sealed. Gas will escape through the safety valves only in case of overcharging or cell failure. VRLA batteries are maintenance free for life. AGM stands for Absorbent Glass Mat. In these batteries the electrolyte is absorbed into a glass-fibre mat between the plates by capillary action. As explained in our book ‘Energy Unlimited’, AGM batteries are more suitable for short-time delivery of very high currents (engine starting) than gel batteries
Solar Battery – Victron 110AH 12V Deep Cycle AGM
VRLA stands for Valve Regulated Lead Acid, which means the batteries are sealed. Gas will escape through the safety valves only in case of overcharging or cell failure. VRLA batteries are maintenance free for life. AGM stands for Absorbent Glass Mat. In these batteries the electrolyte is absorbed into a glass-fibre mat between the plates by capillary action. As explained in our book ‘Energy Unlimited’, AGM batteries are more suitable for short-time delivery of very high currents (engine starting) than gel batteries
Solar Technology – Surge 45
I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Categories: MCB Circuit Breakers, MCCB descriptionI am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Solar Technology – Surge 45
I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Categories: MCB Circuit Breakers, MCCB descriptionI am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.